Abene VHF3 Metaalfrees machine: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
# Abene VHF3 Metaalfrees machine #
+
= Abene VHF3 Metaalfrees machine =
  
 
See github for documentation. [https://github.com/MakerSpaceLeiden/AbeneMill/]
 
See github for documentation. [https://github.com/MakerSpaceLeiden/AbeneMill/]
  
## Status ##
+
= Status =
  
 
Not yet operational Unresolved issues are:
 
Not yet operational Unresolved issues are:
Regel 11: Regel 11:
 
#. Z axis blocks at 80%.
 
#. Z axis blocks at 80%.
  
## To procure/find ##
+
= To procure/find =
  
#. Water soluble coolant (artikel 01345 at HBM)
+
#. Water soluble coolant (artikel 01345 at HBM) - minstens 2 liter bij 1:20 verdunning.
 
#. ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594)
 
#. ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594)
 
#. Spanner for the easy-change ISO 40 taper/collet.
 
#. Spanner for the easy-change ISO 40 taper/collet.
Regel 19: Regel 19:
 
#. Set of collets for ISO 40.
 
#. Set of collets for ISO 40.
  
## Lubrication History ##
+
Advies van Abene:
 +
 
 +
# Q8 Goya NT68 (gear oil) spindle and feed gear box)
 +
# For everything else, Q8 Wagner NT68 (Slideway lube)
 +
 
 +
= Lubrication History =
  
 
Details on github: [https://github.com/MakerSpaceLeiden/AbeneMill/tree/master/lubrication]
 
Details on github: [https://github.com/MakerSpaceLeiden/AbeneMill/tree/master/lubrication]

Versie van 9 dec 2017 om 23:34

Abene VHF3 Metaalfrees machine

See github for documentation. [1]

Status

Not yet operational Unresolved issues are:

  1. . Mounting of pump
  2. . Filling of reservoir with the right mix
  3. . Z axis blocks at 80%.

To procure/find

  1. . Water soluble coolant (artikel 01345 at HBM) - minstens 2 liter bij 1:20 verdunning.
  2. . ISO 40 with drill chuck. Or MT4/ISO40 in which the chuck of the lathe would fit (misschien HBM 02594)
  3. . Spanner for the easy-change ISO 40 taper/collet.
  4. . Small spanner for the taper bolt.
  5. . Set of collets for ISO 40.

Advies van Abene:

  1. Q8 Goya NT68 (gear oil) spindle and feed gear box)
  2. For everything else, Q8 Wagner NT68 (Slideway lube)

Lubrication History

Details on github: [2]

  1. . Main drive gearbox, spindle gearbox, drive gearbox on the left.
    1. . Replaced with Hykrol HLP ISO-VG 100 (ISO 100 hydraulic oil), 2017-11-19. 5L was about sufficient all 3 gearboxes.
  2. . Overarm bearing
    1. . Emptied and cleaned 2017-11-19. Not yet replaced.
  3. . Sideways
    1. . Emptied and cleaned 2017-11-12. Not yet replaced.
  4. . Kneejacking screw
    1. . Emptied and cleaned 2017-11-29. Replaced by ISO 46 hydraulic oi.l 2017-11-29.
  5. . Headstock and motor bearings.
    1. . Emptied and cleaned. 2017-11-29. Replaced by ISO 100 hydraulic oil. 2017-11-29.