Jigs (wood)

Catégorie:Wood This page regroups information about custom made jigs for various machines of the wood workshop.

Table Saw jigs

Rod maker (table saw lathe)

The purpose of this jig is to create straight, cylindrical rods of wood, between ~20mm and ~90mm diameter, up to 65 cm in length, i.e. longer than what you can do with the wood lathe.

Material preparation

=== Table saw preaparation In order to operate the jig, it is necessary to remove the riving knife of the table saw, behind the saw blade. This can be done with a 19mm wrench.