NodeTussendeur: verschil tussen versies
| Regel 5: | Regel 5: | ||
Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel | Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel | ||
| − | [[Bestand:TussendeurNode. | + | [[Bestand:TussendeurNode.jpg|miniatuur]] |
| + | |||
| + | Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30: | ||
| + | |||
| + | [[Bestand:TussendeurNode-log.jng|320px]] | ||
= Electronics = | = Electronics = | ||
| Regel 17: | Regel 21: | ||
Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards) | Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards) | ||
| − | Firmware last updated 2022/2/ | + | Firmware last updated 2022/2/19 with XXX - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup. |
Versie van 19 feb 2022 om 13:19
PoE powered Node on Ethernet voor de tussendeur in de hal.
Current IP address: 192.168.6.30 / 30:AE:A4:13:E9:3C and connected to port 2 of the patch panel
Has debugging on telnet, MQTT, syslog and a web interface: http://192.168.6.30:
Electronics
Mosfet om een Solenoide in de deur aan te sturen. Deze draait op de 48V van de PoE.
Runs on the PowerNodeV11 board. It has a separate splitter to extract a higher voltage/current (12V) for the solenoid.
History
Rebuild sometime 2016 and upgraded early 2018 with the 1.1 batch (yellow boards)
Firmware last updated 2022/2/19 with XXX - to fix caching and a range of errors found by Duco when using the Arduino rather than the VisualStudio setup.
