NodeWoodlathe: verschil tussen versies
(→Use) |
|||
| Regel 11: | Regel 11: | ||
Swipe your card at the bottom. LED wil come on solid (or flash rapidly during check or error). | Swipe your card at the bottom. LED wil come on solid (or flash rapidly during check or error). | ||
| − | Operate | + | Operate the machine with the red/green on-off button on the right end / near the legs. |
| − | Press orange button once done. | + | Press orange button once you are done to lock things. Note: the unit will '''refuse to power off while the machine is running'''. So first power off the machine with its own red/green button (press green). Then press the button on the node to `lock' it. |
== Log == | == Log == | ||
Versie van 1 jan 2024 om 20:40
PoE node voor the woodlathe.
Use
When stationaly - led will flash briefly every few seconds. If it flashes faster - it is unhappy about something.
Swipe your card at the bottom. LED wil come on solid (or flash rapidly during check or error).
Operate the machine with the red/green on-off button on the right end / near the legs.
Press orange button once you are done to lock things. Note: the unit will refuse to power off while the machine is running. So first power off the machine with its own red/green button (press green). Then press the button on the node to `lock' it.
Log
Thu Jan 23 13:55:07 CET 2020 ac/log/woodlathe woodlathe {
"state" : "Powered - but idle",
"heap_free" : 209620,
"current" : 9.7e-05,
"rfid_misses" : 4,
"approve" : 1,
"running_time" : 8,
"rfid_scans" : 1,
"bad_poweroff" : 0,
"requests" : 1,
"net" : "UTP",
"id" : "e8d97ea4ae30",
"cache_hit" : 1,
"errors" : 1,
"machine" : "woodlathe",
"ip" : "192.168.6.207",
"cache_miss" : 0,
"deny" : 0,
"mac" : "30:AE:A4:7E:D9:EB",
"maxMqtt" : 768,
"mqtt_reconnects" : 1,
"loop_rate" : 7184.777,
"manual_poweroff" : 0,
"powered_time" : 277,
"beat" : 1579784108,
"coreTemp" : 55.55556,
"node" : "woodlathe",
"idle_poweroff" : 0,
"interlock" : false
}
