Sjabloon:Imperial: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
 
(3 tussenliggende versies door dezelfde gebruiker niet weergegeven)
Regel 1: Regel 1:
<div style="margin:6px; padding:6px">
+
<noInclude>[[Category:Gereedschapssjablonen]]</noinclude>
<div style="padding:12px; border:2px solid red">
+
<div style="margin:12px; padding:12px; border:2px solid red; max-width:max-content">
<includeonly>[[Category:Imperial]]</includeonly>
+
[[Category:Imperial]]
[[Bestand:imperial-label.png|80px|Imperial]]
+
[[Bestand:imperial-label.png|80px|God save the queen!]]
 
'''WARNING''': Imperial tools have slightly different sizes than Metric ones.  
 
'''WARNING''': Imperial tools have slightly different sizes than Metric ones.  
  
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this[[:Categorie:Imperial|list for all the imperial tools]] we have.
+
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this [[:Categorie:Imperial|list for all the imperial tools]] we have.
  
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
 
  
Be especially careful with the ''close friends''', such as
+
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.<br />
sizes like 5/8inch and 16mm. Although the difference is 0.13mm - '''you will ruin''' (or usually just crack) a collet or similar..  
+
Be especially careful with the ''close friends'', such as sizes like 5/8inch and 16mm;<br />
 
+
although the difference is 0.13mm - '''you will ruin''' (or usually just crack) a collet or similar..  
</div>
 
 
</div>
 
</div>

Huidige versie van 11 apr 2020 om 23:02

God save the queen! WARNING: Imperial tools have slightly different sizes than Metric ones.

Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.


Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..