T-slot and scraper: verschil tussen versies
(→T-slot nuts) |
|||
(4 tussenliggende versies door 2 gebruikers niet weergegeven) | |||
Regel 1: | Regel 1: | ||
− | + | Zie ook [[Opspanset / T-Slot Clamping Kit]]. | |
== T-slot scraper == | == T-slot scraper == | ||
− | See: -- improvement for next time - have the round backside fit the round slots at the edge. And have another what that fits the 'bin's either side. | + | See: https://www.thingiverse.com/thing:2733328 and https://www.thingiverse.com/thing:1784353 -- improvement for next time - have the round backside fit the round slots at the edge. And have another what that fits the 'bin's either side. |
== T-slot nuts == | == T-slot nuts == | ||
+ | |||
+ | For the [[Abene VHF3 Metaalfrees machine|large Mill]], the [[Verdeeltafel/Rotarytable]] and most of the other t-Slots (all but the red one are metric). | ||
[[Bestand:T-slot-nuts.jpg|T Slot sizing (DIN 570)]] | [[Bestand:T-slot-nuts.jpg|T Slot sizing (DIN 570)]] |
Huidige versie van 29 sep 2021 om 15:42
Zie ook Opspanset / T-Slot Clamping Kit.
T-slot scraper
See: https://www.thingiverse.com/thing:2733328 and https://www.thingiverse.com/thing:1784353 -- improvement for next time - have the round backside fit the round slots at the edge. And have another what that fits the 'bin's either side.
T-slot nuts
For the large Mill, the Verdeeltafel/Rotarytable and most of the other t-Slots (all but the red one are metric).