ER-Sleutels: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
 
[[categorie:tool]][[category:metal]][[category:wood]]
 
[[categorie:tool]][[category:metal]][[category:wood]]
 +
{{SafetyCat5}}
 +
{{NoiseCat3}}
  
 
The various [[ER25 Collets and holders|ER Collets]], [[Flange Collet Holder - spantang houder voor verdeeltafel|Collet Holder]], various [[Abene VHF3 Metaalfrees machine|Abene ISO 40 holders]] and some of the heads/centers for the lathes require the use of special spanners.
 
The various [[ER25 Collets and holders|ER Collets]], [[Flange Collet Holder - spantang houder voor verdeeltafel|Collet Holder]], various [[Abene VHF3 Metaalfrees machine|Abene ISO 40 holders]] and some of the heads/centers for the lathes require the use of special spanners.

Versie van 5 okt 2021 om 12:32

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

This equipment is Noise Category 3: Can be used at all hours. No limits.

The various ER Collets, Collet Holder, various Abene ISO 40 holders and some of the heads/centers for the lathes require the use of special spanners.

Er is ook een Sleutel #29 bij de draaibank speciaal voor het vasthouden van de houder zelf.

Er-spannners.jpg

We have 3 - ER25, ER32 and ER40.

Location

Metal area - on the wall behind the Abene VHF3 Metaalfrees machine.

History

The large ones were bought by the space in April 2020; the small one mid 2019.

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.