Metal Mitresaw / Afkortzaag Metaal: verschil tussen versies
(→Gebruik) |
|||
Regel 79: | Regel 79: | ||
To power on the machine: | To power on the machine: | ||
− | # Ensure | + | # Ensure that the on-off switch on machine is in the horizontal off position. |
# Ensure that pump switch is set as expect it to be. | # Ensure that pump switch is set as expect it to be. | ||
# Press the green 'on' button on the wall control box (to the left of the machine; right most buttons). | # Press the green 'on' button on the wall control box (to the left of the machine; right most buttons). | ||
− | # Use the on-off switch on machine to switch it on. | + | # Red light on machine should turn on. |
+ | |||
+ | To use the machine | ||
+ | |||
+ | # Use the on-off switch on machine to switch it on and off. | ||
To power off the machine: | To power off the machine: | ||
− | # Ensure that | + | # Ensure that the on-off switche on the machine is in the the off position |
# Press the red 'off' button on the wall control box (to the left of the machine). | # Press the red 'off' button on the wall control box (to the left of the machine). | ||
To put the machine into `out of order' mode. | To put the machine into `out of order' mode. | ||
− | # Ensure that all the on-off switches | + | # Ensure that all the on-off switches are in the off position. |
# Press the red 'off' button on the wall control box. | # Press the red 'off' button on the wall control box. | ||
# Turn the key; setting it it '0'. | # Turn the key; setting it it '0'. | ||
# Put the key in one of the safety lock boxes. | # Put the key in one of the safety lock boxes. | ||
− | # Report the issue to the mailing list. | + | # Report the issue to the mailing list forthwith. |
= Electrics = | = Electrics = |
Versie van 1 okt 2023 om 17:05
Inhoud
Status
NOT READY
Zaagblad uitzoeken
Olie uitzoeken en bijvullen - leek een vrij dikke tandwielkast olie (220 of 300 of oz)
Doormeten van spoel/lek
Draadjes swappen
Safety analyse doen
Alle interlocks testen (faalt nu - zie tekeningh met fout hieronder)
Meggen van de motor ivm andere draden die we niet kunnen zien
Classification (not yet made)
- Mag op alle uren gebruikt worden; hou wel rekening met de buren.
- Gevaarlijke machine - inleveren van de waiver bekend met risico's gevaarlijke apparaten formulier] bij bestuur verplicht.
- Normale Instructie & OK bestuur verplicht (cat 2 apparaat)
This equipment is safety category 2:
- Mandatory instructions.
- [liability waiver] on file.
- Approval from trustees, but ok to operate alone
- (but be careful/ensure you have assistance when handling very large things).
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
Maatregelen
- Gebruik van handschoenen verboden
- Geen loshangende haren, sieraden, kleding, ringen, armbanden, touwtjes hoodie.
- Gebruik van een (veiligheids)bril is verplicht.
- Zorg dat je weet waar de noodstoppen zitten.
Belangrijkste veiligheidsaandachtspunten
- Gegrepen worden door de draaiende delen.
- Bewegingen van de assen, beknelling.
- Scherpe snel draaiende zaagblad
- Scherpe spaanders, rondspattende spaanders.
- Rondspatten afgeproken onderdelen (tanden frees, afgebroken as).
- De vloer kan erg glad worden als je de koelvloeistof gebruikt.
Behoud van de machine
XXX
Onderhoud machine
Boor olie
Blad
Olie bijvullen
??
Nieuwe zaagbladen
Zal iets van een 200-225 blad zijn; asgat iets van 32 of 40; met 2 driver pins.
Aandachtspunten gebruik
Moer is `verkeertom' - linksdraaiend - dus met de klok-mee is los.
Gereedschappen
Nog te doen - uitzoeken moersleutel 42 ??
Gebruik
To power on the machine:
- Ensure that the on-off switch on machine is in the horizontal off position.
- Ensure that pump switch is set as expect it to be.
- Press the green 'on' button on the wall control box (to the left of the machine; right most buttons).
- Red light on machine should turn on.
To use the machine
- Use the on-off switch on machine to switch it on and off.
To power off the machine:
- Ensure that the on-off switche on the machine is in the the off position
- Press the red 'off' button on the wall control box (to the left of the machine).
To put the machine into `out of order' mode.
- Ensure that all the on-off switches are in the off position.
- Press the red 'off' button on the wall control box.
- Turn the key; setting it it '0'.
- Put the key in one of the safety lock boxes.
- Report the issue to the mailing list forthwith.
Electrics
Electrics still wrong