Knurling tools: verschil tussen versies
| (6 tussenliggende versies door 3 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| − | [[ | + | [[Category:Tools]][[Category:Metal working tools]][[Category:Metal lathe and mill tools]] |
{{SafetyCat6}} | {{SafetyCat6}} | ||
{{NoiseCat3}} | {{NoiseCat3}} | ||
| − | [[Bestand:HSS Knurling Tool 1.jpeg|miniatuur]] | + | [[Bestand:HSS Knurling Tool 1.jpeg|miniatuur|results of using the tool]] |
[[Bestand:HSS Knurling Tool 2.jpeg|miniatuur]] | [[Bestand:HSS Knurling Tool 2.jpeg|miniatuur]] | ||
| − | + | ||
Locatie: Metaalwerkplaats | Locatie: Metaalwerkplaats | ||
| + | |||
| + | We have a set of 6 knurling 'die's; and a holder. Generally used on ductile metals and mallable plastics. | ||
| + | |||
| + | 3 diamond-shape wheel (as used in the picture) and 3 straight pattern wheels. | ||
| + | |||
| + | == Use == | ||
| + | |||
| + | Consult the internets (youtube) for a video. | ||
| + | |||
| + | In general - use the (lower) speed on the lathe; and make sure that the tool is perfectly aligned, height wise, with the axis. So the line of force is as straight as you can get it. | ||
| + | |||
| + | Then gently run the lathe and move the tool into the work-surface. Give it time and lubricant. | ||
| + | |||
| + | == Changing the wheels === | ||
| + | |||
| + | Use a [[Penuitdrijvers]] to remove the pin; and change the wheel. Do not use a punch -- its pointy end will cause the pin to mushroom. | ||
Huidige versie van 11 nov 2024 om 23:40
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Locatie: Metaalwerkplaats
We have a set of 6 knurling 'die's; and a holder. Generally used on ductile metals and mallable plastics.
3 diamond-shape wheel (as used in the picture) and 3 straight pattern wheels.
Use
Consult the internets (youtube) for a video.
In general - use the (lower) speed on the lathe; and make sure that the tool is perfectly aligned, height wise, with the axis. So the line of force is as straight as you can get it.
Then gently run the lathe and move the tool into the work-surface. Give it time and lubricant.
Changing the wheels =
Use a Penuitdrijvers to remove the pin; and change the wheel. Do not use a punch -- its pointy end will cause the pin to mushroom.
