MT2: verschil tussen versies

Huidige versie van 16 nov 2024 om 23:04

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

We have various MT2 (Morse Taper 2) holders and machines. (For MT4 equipment to go in the lathe spindle, see MT4)

MT2 tooling setup next to the lathe

MT2 ER25 Collet Holder

MT2 to MT4 adapter to allow putting MT2 items to fit in the lathe chuck spindle

Such as:

Pijp-center Tail - Stock Pipe Center voor dikke pijpen
Diverse MT2 Hand chuck
ER 25/32/40 Collets and holders met MT2 einde.
Diverse houders en adaptors om dingen onder een hoek vast te houden. (Where are they?)
Live centre
Dead centre
Tap houders. (Where are these stored?}
22mm drill

And these can be used on several machines:

Useful too:

@@ Regel 1: / Regel 1: @@
-[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Wood]]
+[[Category:Tools]][[Category:Metal working tools]][[Category:Metal lathe and mill tools]][[Category:Wood working tools]]
-[[Categorie:Tools]][[Categorie:Metal working tools]][[Categorie:Wood working tools]]
 {{SafetyCat6}}{{NoiseCat3}}
@@ Regel 24: / Regel 23: @@
 And these can be used on several machines:
-* [[Abene VHF3 Metaalfrees machine]]
+* [[Abene Metal Mill / Freesbank]]
-* [[Houtdraaibank]]
+* [[Wood Lathe / Houtdraaibank]]
-* [[Metaaldraaibank]]
+* [[Metal Lathe / Metaal draaibank]]
-* [[Arboga GM 2508 Geared Head Drill Press Pillar Drill|Drill press metal / boorkolom metaal]]
+* [[Drill Press Metal / Kolomboor metaal]]
 * [[Drill Press Wood / Boorkolom hout]]