SAFETY: verschil tussen versies
(→index risico gereedscap) |
(→index risico gereedscap) |
||
Regel 16: | Regel 16: | ||
= index risico gereedscap = | = index risico gereedscap = | ||
+ | |||
+ | Risk categories: | ||
+ | |||
+ | # Highest category - mandatory instructions, liability waiver on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00. | ||
+ | # Mandatory instructions, liability waiver on file, approval from the trustees, but Ok to operate alone. | ||
+ | # Mandatory instructions _prior to use_. | ||
+ | # Equipment that is dangerous - instructions strongly advised but not mandatory | ||
+ | # Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory | ||
+ | # Other equipment with no limits | ||
+ | |||
+ | Noice categories | ||
+ | |||
+ | # Can only be used between 07:00 and 19:00 | ||
+ | # Can be used outside those hours in moderation. But try to be considerate. And if you feel a need to wear ear protection - you are probably too noisy! | ||
+ | # No limits. | ||
+ | |||
+ | == Category 1 == | ||
Highest category - mandatory instructions, liability waiver on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00 as they make a lot of noise: | Highest category - mandatory instructions, liability waiver on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00 as they make a lot of noise: | ||
Regel 22: | Regel 39: | ||
* Planer - vandiktebank | * Planer - vandiktebank | ||
* [[Vlakbank|Jointer - vlakbank]] | * [[Vlakbank|Jointer - vlakbank]] | ||
+ | |||
+ | == Category 2 == | ||
Mandatory instructions, liability waiver on file, approval from the trustees, but Ok to operate alone. | Mandatory instructions, liability waiver on file, approval from the trustees, but Ok to operate alone. | ||
Regel 32: | Regel 51: | ||
* [[Abene_VHF3_Metaalfrees_machine |Abene Mill - metaaalfrees]] | * [[Abene_VHF3_Metaalfrees_machine |Abene Mill - metaaalfrees]] | ||
* Large Grinder | * Large Grinder | ||
+ | |||
+ | == Category 3 == | ||
Mandatory instructions | Mandatory instructions | ||
Regel 47: | Regel 68: | ||
* T-Shirt_hotplate | * T-Shirt_hotplate | ||
* [[Ultimaker|Ultimaker 3D Printer]] | * [[Ultimaker|Ultimaker 3D Printer]] | ||
+ | |||
+ | == Category 4 == | ||
Equipment that is dangerous - instructions strongly advised but not mandatory | Equipment that is dangerous - instructions strongly advised but not mandatory | ||
Regel 57: | Regel 80: | ||
* Electric band/disk grinder for wood | * Electric band/disk grinder for wood | ||
* [[Slijpmachine_klein|Kleine slijpsteen]] | * [[Slijpmachine_klein|Kleine slijpsteen]] | ||
+ | |||
+ | == Category 5 == | ||
Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory | Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory | ||
Regel 65: | Regel 90: | ||
* Various cutters for the Abene mill. | * Various cutters for the Abene mill. | ||
* [[Ritser|Ritser]] - diamandpunt voor onderhoud slijpstenen. | * [[Ritser|Ritser]] - diamandpunt voor onderhoud slijpstenen. | ||
+ | |||
+ | == Category 6 == | ||
Other equipment with no limits | Other equipment with no limits |
Versie van 31 dec 2017 om 13:56
Veiligheid
Inhoud
verantwoordelijkheid
De eindverantwoorlijkheid voor een veilige werkomgeving en gedrag ligt bij het bestuur. Dat maakt de situatie anders dan thuis. Je hebt niet alleen jezelf heel te houden, maar ook anderen.
Deelnemers behoren zich veilig te gedragen, en onveilige gedragingen en situaties te melden bij het bestuur.
Bij aantal machines is het verplicht bepaalde storingen of problemen te melden. Dit dient zo snel mogelijk; maar uiterlijk binnen 24 te gebeuren. Dit staat in de machine beschrijving.
index risico gereedscap
Risk categories:
- Highest category - mandatory instructions, liability waiver on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00.
- Mandatory instructions, liability waiver on file, approval from the trustees, but Ok to operate alone.
- Mandatory instructions _prior to use_.
- Equipment that is dangerous - instructions strongly advised but not mandatory
- Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory
- Other equipment with no limits
Noice categories
- Can only be used between 07:00 and 19:00
- Can be used outside those hours in moderation. But try to be considerate. And if you feel a need to wear ear protection - you are probably too noisy!
- No limits.
Category 1
Highest category - mandatory instructions, liability waiver on file, approval from the trustees, two people present at all times - and can only be used between 07:00 and 19:00 as they make a lot of noise:
- Wood circle saw table - cirkelzaagtafel
- Planer - vandiktebank
- Jointer - vlakbank
Category 2
Mandatory instructions, liability waiver on file, approval from the trustees, but Ok to operate alone.
With respect to noise - be kind and considerate after 19:00 - and limit yourself to sporadic low-noise use:
- [[Lintzaag_Centauro_500_CO |Wood bandsaw - lintzaag]
- Wood lathe - houtdraaibank
- Metal Lathe
- Abene Mill - metaaalfrees
- Large Grinder
Category 3
Mandatory instructions
- Large CNC cutter -- noise restructions: 07:00-19:00 only.
- Large Laser cutter (zie ook verplichte rapportage/kosten)
- Small Laser cutter (zie ook verplichte rapportage/kosten)
- Wood Mitre saw -- be considerate to our neighbours after 19:00.
- Welding_equipment (zie ook verplichte rapportage/kosten)
- 12 Ton Hydraulische Press
- Sanding_Cabinet
- Metal_bandsaw
- Vinyl_cutter
- PCB_Reflow_Oven
- T-Shirt_hotplate
- Ultimaker 3D Printer
Category 4
Equipment that is dangerous - instructions strongly advised but not mandatory
- Wood drill column
- Metal drill column
- Electric and battery powered tools (Drill, sander, orbital grinders, mill)
- Pneumatic tools (Nibbler, Sander, Grinder, Staple gun) -- be considerate to our neighbours after 19:00.
- Electric standing jigsaw for wood
- Electric band/disk grinder for wood
- Kleine slijpsteen
Category 5
Equipment that is relatively fragile or expensive - so instructions strongly advised if you have not used them before - but not mandatory
- Soldering equipment (air, tipped)
- De-soldeerbout - lucht
- Veneer calipers
- Various cutters for the Abene mill.
- Ritser - diamandpunt voor onderhoud slijpstenen.
Category 6
Other equipment with no limits
- 3 Ton hand pers/press
- Hand tools
- Measuring tools