Add a new tool to the wiki: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met 'Adding a new machine is done easiest by copying the text from a similar machine. Be sure to cover the following though: # what the machine does and especially wha...')
 
 
(23 tussenliggende versies door 6 gebruikers niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Procedures]][[Category:Servers network & websites]][[Category:Tutorials]]
 
Adding a new machine is done easiest by copying the text from a similar machine.
 
Adding a new machine is done easiest by copying the text from a similar machine.
  
Regel 9: Regel 10:
 
# where it is located
 
# where it is located
 
# A section on safety  
 
# A section on safety  
## Containing the safety sheet
+
## Containing the safety sheet [[Safety Sheet]]
 
## Repeat the key points; risks; how to mitigate; how to avoid.
 
## Repeat the key points; risks; how to mitigate; how to avoid.
 
## Practical checks.
 
## Practical checks.
Regel 18: Regel 19:
 
# Maintenance instructions
 
# Maintenance instructions
 
# Things about how it is installed, wired, etc if not trivial.
 
# Things about how it is installed, wired, etc if not trivial.
 +
# Who owns it ?
 +
# Replacing supplies ? Which ? Where ?
 +
 +
In general it is also a good idea to keep a 'setup' or 'build' page during; to document the project of getting the machine up and running; and perhaps use parts of this page as the basis for your maintenance page.
 +
 +
The [[Template for machine wiki page]] can be helpfull.

Huidige versie van 17 nov 2024 om 22:47

Adding a new machine is done easiest by copying the text from a similar machine.

Be sure to cover the following though:

  1. what the machine does and especially what it is not designed to do.
  2. Link the the manual.
  3. what sort of material it can best handle - and what sort of material may damage it.
  4. a picture
  5. where it is located
  6. A section on safety
    1. Containing the safety sheet Safety Sheet
    2. Repeat the key points; risks; how to mitigate; how to avoid.
    3. Practical checks.
  7. Section on operating
  8. Section on known issues/surprises
  9. Power off and cleaning instructions
  10. Out of order instructions
  11. Maintenance instructions
  12. Things about how it is installed, wired, etc if not trivial.
  13. Who owns it ?
  14. Replacing supplies ? Which ? Where ?

In general it is also a good idea to keep a 'setup' or 'build' page during; to document the project of getting the machine up and running; and perhaps use parts of this page as the basis for your maintenance page.

The Template for machine wiki page can be helpfull.