Spray gun: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Regel 7: Regel 7:


=Description=
=Description=
[[Bestand:Spray_gun.jpg]]
[[Bestand:Spray_gun.jpg|thumb]]
The spray gun is composed of the following elements:
# '''Nozzle''': it atomizes the fluid. 3 different nozzle sizes are available: 1.4mm, 1.7mm and 2.0mm.
# '''Fan control''': controls the shape of the fan of the gun, ie. the cloud of atomized fluid.
# '''Fluid control''': control the amount of fluid that gets delivered
# '''Air control''': controls the air flow. This should be left fully open (unless you know what you are doing).
#'''Pressure regulator''': controls the air pressure via the knob on the side. It should be around 2-2.5bar (working pressure, ie. while depressing the trigger)
#'''Water separator''': prevents water from entering the gun.


=Use=
=Use=

Versie van 18 nov 2024 08:51

Compressed air spray gun for apply paint/clear coats.

Location

On the Perslucht Bord.

Description

The spray gun is composed of the following elements:

  1. Nozzle: it atomizes the fluid. 3 different nozzle sizes are available: 1.4mm, 1.7mm and 2.0mm.
  2. Fan control: controls the shape of the fan of the gun, ie. the cloud of atomized fluid.
  3. Fluid control: control the amount of fluid that gets delivered
  4. Air control: controls the air flow. This should be left fully open (unless you know what you are doing).
  5. Pressure regulator: controls the air pressure via the knob on the side. It should be around 2-2.5bar (working pressure, ie. while depressing the trigger)
  6. Water separator: prevents water from entering the gun.

Use

Ownership and history

Bought by Valère in November 2024. Property of the space

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.