DeWalt Wood Chip Extractor / Grote afzuiger: verschil tussen versies
(→deWalt large dust extractor / MOT) |
|||
Regel 1: | Regel 1: | ||
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}} | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}} | ||
− | [[Bestand:DeWalt.jpg|miniatuur]] | + | [[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]] |
= deWalt large dust extractor / MOT = | = deWalt large dust extractor / MOT = |
Versie van 29 nov 2018 om 20:27
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
deWalt large dust extractor / MOT
Use
- check if it needs to be emptied
- check that there is not a lot of buildup in the tube; or bits of wood stuck.
- plug it in
- control it with the on/of switch on the side
Post Use
- check that there is not a lot of buildup in the tube; or bits of wood stuck.
- unplug it
- if 2/3rd full - empty it.
Cleaning
Empty the bag once it is about 2/3 full. Any more and it'll be a total mess (see photo).
Tie the gray binliner inside close before lifting it out.
Once it is empty - put a new gray binliner inside the green bag.