Hand Router / Bovenfrees: verschil tussen versies
| Regel 1: | Regel 1: | ||
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}{{DustControl3}}[[Category:OnLoan]] | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}{{DustControl3}}[[Category:OnLoan]] | ||
<gallery> | <gallery> | ||
| − | frezen1.jpeg| | + | frezen1.jpeg|3 Frezen. |
| − | frezen2.jpeg| | + | frezen2.jpeg|Frees in box, Ramon |
frezen3.jpeg|Bijschrift2 | frezen3.jpeg|Bijschrift2 | ||
</gallery> | </gallery> | ||
Versie van 10 jan 2019 om 16:32
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
This equipment is ought to be used with active dust control if you use it for more than 10-15 minutes in total.
3 Frezen.
Frees in box, Ramon
- Frezen3.jpeg
Bijschrift2
Electric hand router. We have several ones; from very light to quite heavy as well as a Router Table.
Be very careful with the collet sizes; we have both Imperial and Metric ones; in 1/4th of an inch; 6mm and 8mm.
Know that 1/4 of an inch is almost 6mm - but not quite. Putting a 6mm bit into a 1/4th of an inch collet or vise versa will absolotely ruin it. And they are expensive and hard to replace (long lead team; 30-60 euro's).
So check that your cutter shank fits absolutely perfectly in the collet; with virtually no wobble even when not yet tightened.
Ownership
The Green Bosch POF 1400 ACE is owned by Ramon, it is labeled. See Category:OnLoan.
Een Groene Bosch bovenfrees is van Ronald.Category:OnLoan.
Een Groene Bosch bovenfrees is van Alex. Category:OnLoan.
The light blue one has been donated to the space by Dirk.
