Combi Shell Mill Holder DIN40-16MM: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 6: Regel 6:
 
[[Bestand:Mill-40-16-extra.jpg|miniatuur|16mm rings and spacers]]
 
[[Bestand:Mill-40-16-extra.jpg|miniatuur|16mm rings and spacers]]
  
== Drive dogs  
+
== Drive dogs ==
  
 
You may have to adjust the drive dogs on the Abene if the taper does not sit flush.
 
You may have to adjust the drive dogs on the Abene if the taper does not sit flush.
  
== Ownership
+
== Location ==
 +
 
 +
The tools and spare bits are in the blue cabinet; the holder is on the holder shelf.
 +
 
 +
== Ownership ==
  
 
Dirk-Willem van Gulik, on long term loan (See [[:Categorie:OnLoan]]).
 
Dirk-Willem van Gulik, on long term loan (See [[:Categorie:OnLoan]]).

Versie van 20 okt 2019 om 18:03

Combi Mill holder - both for lateral and dodge drive.

Includes 10 spacers of various sizes. Try not to loose these - they are not cheap.

Combi Shell Mill, DIN40, 16mm with tooling
16mm rings and spacers

Drive dogs

You may have to adjust the drive dogs on the Abene if the taper does not sit flush.

Location

The tools and spare bits are in the blue cabinet; the holder is on the holder shelf.

Ownership

Dirk-Willem van Gulik, on long term loan (See Categorie:OnLoan).