Verdeel tafel - Rotary table: verschil tussen versies
(→Mounting on the Abene) |
|||
| Regel 20: | Regel 20: | ||
Depending on what you want to do - you may need to mount the plate diagonal on the [[Abene VHF3 Metaalfrees machine]] on order to get a wider range. See image blow | Depending on what you want to do - you may need to mount the plate diagonal on the [[Abene VHF3 Metaalfrees machine]] on order to get a wider range. See image blow | ||
| − | [[Bestand:rotary-table-diagonal.jpg|400px]] | + | [[Bestand:rotary-table-diagonal.jpg|400px]][[Bestand:rotary-table-diagonal2.jpg|400px]] |
So the 'low' end is in de middle groove; the high end is in the front one. This let you still rotate the handle - but have a wider range so you do not hit the 'back' stop. | So the 'low' end is in de middle groove; the high end is in the front one. This let you still rotate the handle - but have a wider range so you do not hit the 'back' stop. | ||
Versie van 25 nov 2019 om 10:38
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Flat, rotary table. It can be mounted on the various milling and cutting machines.
We also have a Horizontal one.
Mounting something on it
It will take the smallest sized nuts for mounting -- but often it is easier to use the M12 bolts that are in the top drawer of the blue cabinet.
Mounting on the Abene
Depending on what you want to do - you may need to mount the plate diagonal on the Abene VHF3 Metaalfrees machine on order to get a wider range. See image blow
So the 'low' end is in de middle groove; the high end is in the front one. This let you still rotate the handle - but have a wider range so you do not hit the 'back' stop.
