Toolmakers Clamp: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Use)
Regel 1: Regel 1:
 
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]
 
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]
[[Bestand:Toolamkersclamp.jpg|miniatuur|Voorbeeld toolmakers clam -kleinste maat.]]
+
[[Bestand:Toolamkersclamp.jpg|miniatuur|Voorbeeld toolmakers clamp -kleinste maat.]]
 +
[[Bestand:Toolamkersclamp2.jpg|miniatuur|Voorbeeld toolmakers clamp - 2020 donation]
 +
 
 
Location: Metaalwerkplaats - top shelf of the blue cabinet.
 
Location: Metaalwerkplaats - top shelf of the blue cabinet.
  
We have 3 pairs of toolmakers clamps (machinist clamps) in the sizes small/50mm, medium/75mm and large/125mm (two each).
+
We have 3 pairs of toolmakers clamps (machinist clamps) in the sizes small/50mm, medium/75mm and large/125mm (two each). And 3 smaller ones.
  
 
They help you clamp things safely; e.g. in the donkeysaw, the abene and on the big drill/router-pillar.
 
They help you clamp things safely; e.g. in the donkeysaw, the abene and on the big drill/router-pillar.
Regel 13: Regel 15:
 
== Ownership and History ==
 
== Ownership and History ==
  
Bought by the makerspace in November 2019
+
* Bought by the makerspace in November 2019
 +
* The small 3 where donated to the Makerspace in November 2020.
  
 
== Use ==
 
== Use ==

Versie van 13 nov 2020 om 22:28

Voorbeeld toolmakers clamp -kleinste maat.

[[Bestand:Toolamkersclamp2.jpg|miniatuur|Voorbeeld toolmakers clamp - 2020 donation]

Location: Metaalwerkplaats - top shelf of the blue cabinet.

We have 3 pairs of toolmakers clamps (machinist clamps) in the sizes small/50mm, medium/75mm and large/125mm (two each). And 3 smaller ones.

They help you clamp things safely; e.g. in the donkeysaw, the abene and on the big drill/router-pillar.

Use

Consult the internets (youtube) for a video. E.g. https://www.youtube.com/watch?v=ZhCEej-RLd4, http://www.homews.co.uk/page267.html and https://www.wonkeedonkeetools.co.uk/toolmakers-clamps/how-to-use-a-toolmaker-s-clamp

Ownership and History

  • Bought by the makerspace in November 2019
  • The small 3 where donated to the Makerspace in November 2020.

Use

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.