Optical Thermometer: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Geen bewerkingssamenvatting
Geen bewerkingssamenvatting
 
(9 tussenliggende versies door 2 gebruikers niet weergegeven)
Regel 1: Regel 1:
[[Categorie:Tool]][[Category:Measuring]]
[[Category:Tools]][[Category:Metal working tools]][[Category:Wood working tools]][[Category:Measuring tools]][[Category:Safety]][[Category:Car repair tools]][[Category:Arts and crafts tools]]
{{NoiseCat3}}
{{SafetyCat5}}
[[Bestand:Infrared-thermometer.jpg|miniatuur]]
[[Bestand:Infrared-thermometer.jpg|miniatuur]]
 
{{NoiseCat3}}{{SafetyCat5}}
Not yet documented - a `point and shoot' style infrared thermometer.
Not yet documented - a `point and shoot' style infrared thermometer.


See also the  [[FLIR camera]] and [[Thermometer]].
See also the  [[FLIR camera / Warmtebeeldcamera|FLIR camera]] and [[Thermometer K-thermocouple]].


= Box content =
= Box content =
Regel 14: Regel 12:
= Location =
= Location =


With the [[FLIR camera]] under the middle 3D printer.
With the [[FLIR camera / Warmtebeeldcamera|FLIR camera]] under the middle 3D printer.


= History and Ownership =
= History and Ownership =


not documented yet
not documented yet

Huidige versie van 16 nov 2024 22:41

This equipment is Noise Category 3: Can be used at all hours. No limits.

This equipment is safety category 5: Equipment that is relatively fragile or expensive

  • In person instructions is not mandatory.
  • Reading the wiki, and following the instructions, is mandatory.

Not yet documented - a `point and shoot' style infrared thermometer.

See also the FLIR camera and Thermometer K-thermocouple.

Box content

not documented yet

Location

With the FLIR camera under the middle 3D printer.

History and Ownership

not documented yet