DeWalt Impact drill/electric screwdriver: verschil tussen versies
| Regel 1: | Regel 1: | ||
| − | |||
[[Categorie:Tools]][[Categorie:Metal working tools]][[Categorie:Wood working tools]][[Category:Bike repair tools]][[Category:Car repair tools]] | [[Categorie:Tools]][[Categorie:Metal working tools]][[Categorie:Wood working tools]][[Category:Bike repair tools]][[Category:Car repair tools]] | ||
{{SafetyCat6}}{{NoiseCat2}} | {{SafetyCat6}}{{NoiseCat2}} | ||
Huidige versie van 11 nov 2024 om 23:13
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.
To screw in (wood)screws. The 'BRRRRAT'-sound is the hammer mechanism in action.
Best used with impact screws that have small serations on the spiral.
We have Dopsleutel - moersleutel adapters / Impact Socket Adaptors.
Note: the noise of the hammer becomes amplified by the wood you're driving a screw into.
This makes it loud enough to disturb the neighbors: consider using the cordless drill after 19:00.
There are two of them; one in the woodworkshop and one in the Metal workshop. Try to keep them in their respective areas so that the wood one stays clean(er).
See also DeWalt Handdrill.
Location
Woodworkshop - in a holder on the wall near the workbench left. Metalworhshop - in a holder near the Torq rol on the wall.
History
- First set Bought mid 2015
- Second set Bought mid 2020
