Steeksleutels Spanners Wrenches: verschil tussen versies
| (5 tussenliggende versies door 2 gebruikers niet weergegeven) | |||
| Regel 1: | Regel 1: | ||
| − | [[ | + | [[Category:Tools]][[Category:Wood working tools]][[Category:Metal working tools]][[Category:Bike repair tools]][[Category:Car repair tools]][[Category:Imperial tools]] |
{{SafetyCat6}}{{NoiseCat3}} | {{SafetyCat6}}{{NoiseCat3}} | ||
| − | Also see the [[Dopsleutelset | + | Also see the [[Dopsleutelset Doppenset Socket wrenches]] page. |
[[Bestand:steeksleutels-EU.jpeg|miniatuur|Steeksleutels - Metric]] | [[Bestand:steeksleutels-EU.jpeg|miniatuur|Steeksleutels - Metric]] | ||
| Regel 13: | Regel 13: | ||
= Locations = | = Locations = | ||
| − | # The metric and imperial spanner | + | # The metric and imperial spanner sets are on opposite sides of the old air-filter box in the centre of the room. |
# The small spanner set is in the wood shop. | # The small spanner set is in the wood shop. | ||
| − | # The | + | # The dopsleutel/socket wrench set is in the red cart in the metal area. |
Huidige versie van 16 nov 2024 om 23:46
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Also see the Dopsleutelset Doppenset Socket wrenches page.
Owned by the space.
Try not to mix Metric and Imerial ! It ruins the bolts for the next person.
Locations
- The metric and imperial spanner sets are on opposite sides of the old air-filter box in the centre of the room.
- The small spanner set is in the wood shop.
- The dopsleutel/socket wrench set is in the red cart in the metal area.
History
Owned the space, bought in 2015 (small set), 2017 (dopsleutelset metric), 2019(imperial) and late 2019 (big metric set)
WARNING: Imperial tools have slightly different sizes than Metric ones.
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..
