DRO maten en manual: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Linealen)
 
(23 tussenliggende versies door 3 gebruikers niet weergegeven)
Regel 1: Regel 1:
== Lathe : DR_2L (LED) ==
+
[[Category:Metal]]{{Fragiel}}
 +
[[Categorie:Tools]][[Categorie:Metal working tools]][[Category:Metal lathe and mill tools]][[Category:Measuring tools]]
 +
== Draaibank / Lathe : DR_2L (LED) ==
  
 +
Digitale Readout (2 Linealen) op de [[Metal Lathe / Metaal draaibank| Draaibank voor metaal]].
  
 +
[[Bestand:Dro-lathe-unit.jpg|200px|DRL Lathe DR_2L (LED)]]
  
 +
Handleiding: [[https://github.com/MakerSpaceLeiden/Manuals/raw/master/Metal-lathe-huvema/Delos-OperationManual-SP-c.pdf Delos DR_2L]].
  
Manaul<a href="https://github.com/MakerSpaceLeiden/Manuals/raw/master/Metal-lathe-huvema/Delos-OperationManual-SP-c.pdf ">https://github.com/MakerSpaceLeiden/Manuals/raw/master/Metal-lathe-huvema/Delos-OperationManual-SP-c.pdf </a>
+
== Staande Frees / Abene: DLS-3V (LCD) ==
  
 +
3 assen, XYZ, digitale readout (digitale linealen) voor op de [[Abene Metal Mill / Freesbank]].
  
 +
[[Bestand:Dro-abene-unit.jpg|200px|DRO Abene DLS-3V (LCD)]]
  
== Abene: DLS-3V (LCD) ==
+
Handleiding: [[https://github.com/MakerSpaceLeiden/AbeneMill/raw/master/documentation/DS50-LCDDRO_OperationManual_V1.pdf Delos DLS-3V]].
  
 +
== History ==
 +
===Purchase===
 +
Bought by the space summer 2020.
  
 +
===Abene mill display replacement===
  
 +
Over the 2023/2024 winter holidays, the LCD display in the Abene DRO (the DLS-3V) failed. [[User:PeterBosch]] confirmed that it was due to the flex PCB starting to separate from the panel's Chip-On-Glass style controller. This type of failure is not repairable, and as such the entire panel needed to be replaced.</p>
 +
 +
The replacement panel was [https://nl.aliexpress.com/i/4000152031134.html?gatewayAdapt=glo2nld bought from this AliExpress listing] (careful - the default option is "only touch" - which means only a digitizer fitting the module, and we need "only lcd" - the LCD itself).
 +
 +
After installing the new panel, the DRO appears to be fully functional again.
 +
 +
== Electronics ==
 +
 +
[[Bestand:Dro-signals.jpg|600px|Singals/pinning DRO linealen]]
  
 
== Linealen ==
 
== Linealen ==
 
  
 
* Abene:
 
* Abene:
Regel 25: Regel 44:
  
 
[[Bestand:Dro-lineaal.png|omkaderd|Afmetingen DRO linealen]]
 
[[Bestand:Dro-lineaal.png|omkaderd|Afmetingen DRO linealen]]
[[Bestand:Dro-kast.png|omkaderd|Afmetingen DRO Controle kast]]
 

Huidige versie van 28 okt 2024 om 23:58

Handle with care - fragile ! Handle with care.
This is a precision tool with exact dimensions and straightness.
That means: handle it gently, don't hammer on it or use it as a crowbar and so on.
(if you need a crowbar - these are wonderful for that!)


It is very important that if you accidentally drop it or think it may be out of line

  • either mark the tool very clearly...
  • or report this to the mailing list...

...so that your fellow makers do not ruin their work.

Draaibank / Lathe : DR_2L (LED)

Digitale Readout (2 Linealen) op de Draaibank voor metaal.

DRL Lathe DR_2L (LED)

Handleiding: [Delos DR_2L].

Staande Frees / Abene: DLS-3V (LCD)

3 assen, XYZ, digitale readout (digitale linealen) voor op de Abene Metal Mill / Freesbank.

DRO Abene DLS-3V (LCD)

Handleiding: [Delos DLS-3V].

History

Purchase

Bought by the space summer 2020.

Abene mill display replacement

Over the 2023/2024 winter holidays, the LCD display in the Abene DRO (the DLS-3V) failed. User:PeterBosch confirmed that it was due to the flex PCB starting to separate from the panel's Chip-On-Glass style controller. This type of failure is not repairable, and as such the entire panel needed to be replaced.

The replacement panel was bought from this AliExpress listing (careful - the default option is "only touch" - which means only a digitizer fitting the module, and we need "only lcd" - the LCD itself).

After installing the new panel, the DRO appears to be fully functional again.

Electronics

Singals/pinning DRO linealen

Linealen

  • Abene:
* X: 750mm – DLS-W-750 mm
* Y: 500mm – DLS-W-500 mm
* Z: 200mm – DLS-W-250 mm
  • Lathe
* X: 760mm: DLS-W-800 mm
* Y: 160mm: DLS-S-200 mm compacte liniaal
Afmetingen DRO linealen