Zwaluwstaartmal: verschil tussen versies

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
Ad Belder (overleg | bijdragen)
Geen bewerkingssamenvatting
Ad Belder (overleg | bijdragen)
Geen bewerkingssamenvatting
Regel 1: Regel 1:
[[Category:Tool]][[Category:Wood]]<br  />{{SafetyCat6}}
[[Category:Tool]][[Category:Wood]]<br  />{{SafetyCat6}}
<br  />{{NoiseCat3}}<br  />
<br  />{{Fragiel}}<br  />


 
== Zwaluwstaartmal Orange Tools CMT300 ==
This equipment is safety category 6: Other equipment with no limits.
 
 
<br  />{{NoiseCat3}}This equipment is Noise Category 3: Can be used at all hours. No limits.<br  />{{Fragiel}}<br  />
 
 
 
Zwaluwstaartmal Orange Tools CMT300
 


[[Bestand:Zwaluwstaart mal .jpg]]<br  />= Location = Houtwerkplaats
[[Bestand:Zwaluwstaart mal .jpg]]<br  />= Location = Houtwerkplaats
Regel 22: Regel 15:
Maximum width: xxx mm
Maximum width: xxx mm


How to use?
== How to use? ==

Versie van 17 jan 2023 18:39


This equipment is safety category 6: Other equipment with no limits.


This equipment is Noise Category 3: Can be used at all hours. No limits.



Handle with care - fragile ! Handle with care.
This is a precision tool with exact dimensions and straightness.
That means: handle it gently, don't hammer on it or use it as a crowbar and so on.
(if you need a crowbar - these are wonderful for that!)


It is very important that if you accidentally drop it or think it may be out of line

  • either mark the tool very clearly...
  • or report this to the mailing list...

...so that your fellow makers do not ruin their work.


Zwaluwstaartmal Orange Tools CMT300


= Location = Houtwerkplaats

= Manual =Manual CMT 300
= History =* Bought by the space Oktober 2022

The tool is suitable for making blind dove tails (see picture).

Applicability: Wood thickness: 12 - 18mm, maximum 16mm recommended Maximum width: xxx mm

How to use?