Reamer / Ruimer: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
k (MarkKlaauw heeft de pagina Reamer hernoemd naar Reamer / Ruimer zonder een doorverwijzing achter te laten)
Regel 1: Regel 1:
 
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]{{SafetyCat4}}{{NoiseCat3}}
 
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]{{SafetyCat4}}{{NoiseCat3}}
[[Categorie:Tools]][[Categorie:Metal working tools]]
+
[[Categorie:Tools]][[Categorie:Metal working tools]][[Category:Metal lathe and mill tools]]
 
Most are in a trapezium shaped wooden box in left drawers gray cabinet. Adjustable and fixed types.
 
Most are in a trapezium shaped wooden box in left drawers gray cabinet. Adjustable and fixed types.
  

Versie van 2 okt 2024 om 21:23

This equipment is safety category 4:

  • In-person, instructions strongly advised but not mandatory.
  • Reading, and following, the instructions on the Wiki is mandatory!

This equipment is Noise Category 3: Can be used at all hours. No limits.

Most are in a trapezium shaped wooden box in left drawers gray cabinet. Adjustable and fixed types.

Not yet documented. See also the Boring Bar if you need to have round holes.

There is also one hand-reamer; usually in the stack above the large grinder with the deburring tools.

Various adjustable reamers in a Woodenbox