Afkrasschuifmaat - Marking caliper: verschil tussen versies
| Regel 1: | Regel 1: | ||
| − | + | [[Categorie:Tools]][[Categorie:Metal working tools]][[Category:Metal lathe and mill tools]][[Categorie:Measuring tools]][[Category:On loan tools]] | |
| − | [[Categorie:Tools]][[Categorie:Metal working tools]][[Category:Metal lathe and mill tools]][[Categorie:Measuring tools]] | ||
{{SafetyCat6}} | {{SafetyCat6}} | ||
{{NoiseCat3}} | {{NoiseCat3}} | ||
Huidige versie van 11 nov 2024 om 22:25
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Handle with care.
This is a precision tool with exact dimensions and straightness.
That means: handle it gently, don't hammer on it or use it as a crowbar and so on.
(if you need a crowbar - these are wonderful for that!)
It is very important that if you accidentally drop it or think it may be out of line
- either mark the tool very clearly...
- or report this to the mailing list...
...so that your fellow makers do not ruin their work.
To scratch a line relative to the edge. There is a space/flat pin in the black sleeve.
Locaties
- Rode kar bij metaal tafel, boven in de kap. Kept in a black sleeve.
History
- On loan from Dirk-Willem
- 2020-11-1 - recalibrated.
