Transfer Punch Overbreng stempel: verschil tussen versies
Naar navigatie springen
Naar zoeken springen
Geen bewerkingssamenvatting |
|||
| Regel 12: | Regel 12: | ||
Kept in the metal workshop - but also very useful if you are working with hard wood. | Kept in the metal workshop - but also very useful if you are working with hard wood. | ||
<hr> | |||
{{MeasurementCare}} | {{MeasurementCare}} | ||
{{SafetyCat6}} | {{SafetyCat6}} | ||
{{NoiseCat3}} | {{NoiseCat3}} | ||
Versie van 24 mei 2019 08:41
We have two sets of transfer punches. One metric, one imperial.
There are to (very accurately) transfer a hole to a plate/object under that hole.
See youtube or https://www.table-saw-guide.com/transfer-punch.html for an example.
Kept in the metal workshop - but also very useful if you are working with hard wood.
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.