DeWalt Wood Chip Extractor / Grote afzuiger: verschil tussen versies
| Regel 1: | Regel 1: | ||
| − | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{ | + | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat1}} |
[[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]] | [[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]] | ||
Versie van 29 nov 2018 om 20:30
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 1: can only be used between 07:00 and 19:00.
Wear hearing protection.
deWalt large dust extractor / MOT
Use
- check if it needs to be emptied
- check that there is not a lot of buildup in the tube; or bits of wood stuck.
- plug it in
- control it with the on/of switch on the side
Post Use
- check that there is not a lot of buildup in the tube; or bits of wood stuck.
- unplug it
- if 2/3rd full - empty it.
Cleaning
Empty the bag once it is about 2/3 full. Any more and it'll be a total mess (see photo).
Tie the gray binliner inside close before lifting it out.
Once it is empty - put a new gray binliner inside the green bag.
