DeWalt Wood Chip Extractor / Mobiele stofafzuiger: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
Regel 1: Regel 1:
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat2}}
+
[[Category:SafetySheet]][[Category:Tool]][[Category:Wood]][[Category:Metal]]{{SafetyCat6}}{{NoiseCat1}}
  
 
[[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]]
 
[[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]]

Versie van 29 nov 2018 om 20:30

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 1: can only be used between 07:00 and 19:00.
Wear hearing protection.

So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always.

deWalt large dust extractor / MOT

Use

  1. check if it needs to be emptied
  2. check that there is not a lot of buildup in the tube; or bits of wood stuck.
  3. plug it in
  4. control it with the on/of switch on the side

Post Use

  1. check that there is not a lot of buildup in the tube; or bits of wood stuck.
  2. unplug it
  3. if 2/3rd full - empty it.

Cleaning

Empty the bag once it is about 2/3 full. Any more and it'll be a total mess (see photo).

Tie the gray binliner inside close before lifting it out.

Once it is empty - put a new gray binliner inside the green bag.