Transfer Punch Overbreng stempel: verschil tussen versies
Naar navigatie springen
Naar zoeken springen
Geen bewerkingssamenvatting |
Geen bewerkingssamenvatting |
||
| Regel 1: | Regel 1: | ||
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Wood]] | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]][[Categorie:Wood]][[Categorie:Imperial]] | ||
We have two sets of transfer punches. One metric, one imperial (try not to mix them). | We have two sets of transfer punches. One metric, one imperial (try not to mix them). | ||
Versie van 24 mei 2019 09:59
We have two sets of transfer punches. One metric, one imperial (try not to mix them).
There are to (very accurately) transfer a hole to a plate/object under that hole.
See youtube or https://www.table-saw-guide.com/transfer-punch.html for an example.
Kept in the metal workshop - but also very useful if you are working with hard wood.
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.