DeWalt Wood Chip Extractor / Grote afzuiger: verschil tussen versies
(→Cleaning) |
|||
| Regel 1: | Regel 1: | ||
| − | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood | + | [[Category:SafetySheet]][[Category:Tool]][[Category:Wood]]{{SafetyCat6}}{{NoiseCat1}} |
| − | [[Bestand:DeWalt-OK.jpg|miniatuur|The | + | [[Bestand:DeWalt-OK.jpg|miniatuur|The deWalt in happy days ]] |
[[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]] | [[Bestand:DeWalt.jpg|miniatuur|So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always. ]] | ||
Versie van 15 sep 2019 om 05:20
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 1: can only be used between 07:00 and 19:00.
Wear hearing protection.
deWalt large dust extractor / MOT
Use
- check if it needs to be emptied
- check that there is not a lot of buildup in the tube; or bits of wood stuck.
- plug it in
- control it with the on/of switch on the side
Post Use
- check that there is not a lot of buildup in the tube; or bits of wood stuck.
- unplug it
- if 2/3rd full - empty it.
deWalt monitor
There is a small NodeDeWalt Wifi monitor attached to the deWalt machine; much the same model as on the GrotePersluchtCompresssor and KleinePersluchtCompressor. It records if the machine is (left) on running or left plugged in during the night when there is no one.
Cleaning
Empty the bag once it is about 2/3 full. Any more and it'll be a total mess (see photo). And as the engine will now spin in the dust - you may well smoldering chips & and an airflow. Not a fun situation.
Tie the gray binliner inside close before lifting it out.
Once it is empty - put a new gray binliner inside the green bag.
