Ultimaker 3D Printer

This equipment is safety category 3:

• Mandatory, in person, instructions.
  
• Make sure you read the Wiki before asking.

This equipment is Noise Category 3: Can be used at all hours. No limits.

This equipment can be left on overnight/ran unattended -- provided that the instructions on this page are followed to the letter.

Ultimaker printers

The Makerspace has two 3D printers, the Ultimaker2+ and the Slightly higher Ultimaker2 extended+

• Ultimaker2 series website
• Wiki page about or Ultimaker2 printers including how to's

Software

For the design of 3D models, the following software can be used:

• Open scad - Openscad is a open source software for creating solid 3D Cad objects (available on Wndows, MacOS and Unix/Linux). Openscad is a scripting language
• Fusion 360 Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS)
• Tinkercad Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding.

Any CAD software that is able to convert your design into a STL files is suitable for designing for or 3D printers. Alternatives are Sketch and Blender.

Using a SD memory card

The Ultimaker printers at the Space need a GCODE file as input. You can put your GCODE files on a SD memory card and insert the memory card directly in one of the Ultimaker 3D printer. The memory cardslot is on the front of the printer.

If you have a design file e.g. from Internet or a design program you need to convert your file, to the GCODE format or Ultimaker 3D printers can work with. STL is a common file file format and the easiest to to convert to GCODE. If you have a design in an other format it is possible to first convert this to the STL file format. Search with google for online conversion tools. (If you find a conversion tool, that gives good results, feel free to add URL here)

STL file can be converted into a GCODE by:

• Cura Cura is used to slice the model and prepare the GCODE (file extension .NGO)
• Slic3r Slic3r is used to slice the model and prepare the GCODE.

Using a laptop

There is also the option to directly print from your laptop, without using a memory card.

• PrintRun allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE file is uploaded via the USB connection on the backside of the printer.

The printing process

Once you have your printable GCODE file on a SD memory card, or your laptop ready and connected, goto Ultimaker2 for a step by step tutorial of the 3D printing process.

Unattended running

The two white Ultimaker 3D printers are one of the few machines that can run unattended/during the night (this is a big no-no for virtually every other machines) *provided* that the following rules are followed:

• Only on the 2 ultimaker 3D printers
• Only with Ultimaker approved/listed material (e.g. normal PLA, etc)
• You must stay with the printer for the first 10 layers or so.
• You must accept that another member removes your print when it is finished.
• You should aim to remove your print soon (i.e. next morning).
• You are encouraged to leave a note with your name or email address.