KWh meter setup

The remote access to the KWh meter depends on a SSH tunnel on the MTA.

File in systemd at: /etc/systemd/system/kwh-tunnel.service:

   [Unit]
   Description=Tunnel to kWh meter.
   After=network.target
   
   [Service]
   ExecStart=/usr/bin/ssh -i /etc/kwh-meter-tunnel -l dirkx -p 222 -T \
        -o ServerAliveInterval=60 -o ExitOnForwardFailure=yes \
        -L 9999:192.168.6.111:80 \
        -L 1161:127.0.0.1:1161 \
        83.163.200.191 -
   RestartSec=30
   Restart=always
   
   [Install]
   WantedBy=multi-user.target

and

   [Unit]
   Description=Local end of SNMP Tunnel to kWh meter.
   After=network.target

   [Service]
   ExecStart=/usr/bin/socat -T15 udp4-recvfrom:2161,bind=127.0.0.1,reuseaddr,fork tcp:127.0.0.1:1161
   RestartSec=30
   Restart=always

   [Install]
   WantedBy=multi-user.target

and this is received by a SSH authorized key line on the space machine:

      no-pty,permitopen="192.168.6.111:80",permitopen="127.0.0.1:1161",command="/usr/local/bin/socat tcp4-listen:1161,reuseaddr,fork UDP:192.168.6.111:161" \
             ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC1...xPGezJYI0wMNlI9XiP kwh tunnel

With localhost:9999 mapped in the CRM for those that need access.

MRTG setup

This should be fixed - i.e. not run as root !!

   [Unit]
   Description=Multi-router Traffic Grapher
   After=syslog.target

   [Service]
   Environment=LANG=C
   ExecStart=/usr/bin/mrtg --daemon 
   Type=forking
   SuccessExitStatus=0 1

   [Install]
   WantedBy=multi-user.target

Config file:

     # This file is for use with mrtg-2.5.4c
     WorkDir: /var/www/mrtg
     WriteExpires: Yes
           
     Title[L1]: Phase 1 power

PageTop[L1]:

L1

     Target[L1]: 1.3.6.1.4.1.31034.2.8.1.5.1&1.3.6.1.4.1.31034.2.8.1.5.1:public@127.0.0.1:2161
     MaxBytes[L1]: 50000
     YLegend[L1]: Ampere
     ShortLegend[L1]: A
     Options[L1]: gauge,nopercent,noo
     Factor[L1]: 0.01
     YTicsFactor[L1]: 0.01
     
     Title[L2]: Phase 2 power

PageTop[L2]:

L2

     Target[L2]: 1.3.6.1.4.1.31034.2.8.1.5.2&1.3.6.1.4.1.31034.2.8.1.5.2:public@127.0.0.1:2161
     MaxBytes[L2]: 50000
     YLegend[L2]: Ampere
     ShortLegend[L2]: A
     Options[L2]: gauge,nopercent,noo
     Factor[L2]: 0.01
     YTicsFactor[L2]: 0.01
     
     Title[L3]: Phase 3 power

PageTop[L3]:

L3

     Target[L3]: 1.3.6.1.4.1.31034.2.8.1.5.3&1.3.6.1.4.1.31034.2.8.1.5.3:public@127.0.0.1:2161
     MaxBytes[L3]: 50000
     YLegend[L3]: Ampere
     ShortLegend[L3]: A
     Options[L3]: gauge,nopercent,noo
     Factor[L3]: 0.01
     YTicsFactor[L3]: 0.01
     
     Title[Power]: Power

PageTop[Power]:

Power

     Target[Power]: 1.3.6.1.4.1.31034.2.8.1.5.1&1.3.6.1.4.1.31034.2.8.1.5.1:public@127.0.0.1:2161 + 1.3.6.1.4.1.31034.2.8.1.5.2&1.3.6.1.4.1.31034.2.8.1.5.2:public@127.0.0.1:2161 + 1.3.6.1.4.1.31034.2.8.1.5.3&1.3.6.1.4.1.31034.2.8.1.5.3:public@127.0.0.1:2161
     MaxBytes[Power]: 200000
     YLegend[Power]: Ampere
     ShortLegend[Power]: A
     Options[Power]: gauge,nopercent,noo
     Factor[Power]: 0.01
     YTicsFactor[Power]: 0.01