ToDo
We maintain the space collectively - as an all volunteer effort.
Inhoud
Physical things
Small jobs
- Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)
- Quick websearch to see if filters for the Dewalt "Olifant" woodchip extractor exist (the topmost bag).
New dust control for the wood workshop: Succobus
- add a polycarbonate window.
- Tubing:
Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length.Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
- Electrics:
- Feed the bare-copper wire through all the tubes -- to stop static dust collection.
red laser engraver/cutter
- put config file on github
- update wiki with new visicut
Blue Laser engraver/cutter
- Specialist work. Don' t undertake unless comfortable and capable. See Blue_laser_engraver
- correct fan wire in power supply contacting fan blades making noise
- mirror allignment needs to be improved.
- bed is too high / focus isn' t quite right.
Outlets on the back are non-grounded and don' t work well (Pump gets no power sometimers, lasercutter resets once it does). So TODO: replace those "universal" outlets with normal european outlets and connect ground wire.
- non-dangerous work:
- update Blue_laser_engraver (Add a picture)
- Honingraatbed?
Wiring
- Affix the dangling small 2 port junction box to the concrete slab above the space door. Plug's are in a box labeled thus in the green cabinet; the big green metabo drill in the woodshop can be set to hammering.
recurring
- vacuüm small room
- And maybe the larger one too (or use a broom)
- Dishes
- clean kitchen
- clean toilet
- put bin out on the right day - volunteer in CRM
- Check the various boxes with drills and replace them from the supply.
- Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
- Return misplaced tools to where they belong.
Documentation things
- Update the wiki to describe the second garbage bin processes.
- We have quite a few Tools without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
- Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
Cyber Things
- Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
- Find and install crosspost module on wordpress to twitter/facebook.
- See if we can do post-by-email or simpler for wordpress.
repairs
floor
- fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
- procure/find/ask shops for scraps a piece of linoleum for the small room. Same thickness, any color. About .. cm wide / .. m long. Or smaller pieces that add up. Also glue and filament (for the seams).
- put it all in place, fixing the "gutter" in front of E-table.
electric
- There is one outlet left of the abene that does not work, possibly a loose wire?
- We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)