Dopsleutelset Doppenset Socket wrenches
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Owned by the space.
We have two sets; the black case contains metric ones; the blue box English/Imperial ones.
To be confirmed; the driver sizes are probably 1/4" and 1/2"
See also the Steeksleutels Spanners Wrenches page and the Momentsleutel TorqueWrench page.
There is also a set Dopsleutel - moersleutel adapters / Impact Socket Adaptors for use with the DeWalt Impact drill/electric screwdriver.
Location
- Metric set - black box in bottom red cart in the metal work shop
- Imperial set - blue small box in a draw of the red cart in the metal work shop
Try not to mix the two!
History
Owned by the space. Early 2017 for the metric, mid 2019 for imperial).
WARNING: Imperial tools have slightly different sizes than Metric ones.
Using the wrong one will often damage the bolt, nut or whatever you are working on. See this list for all the imperial tools we have.
Try not to mix them with our metric tools -- to make sure your fellow maker does not ruin their work.
Be especially careful with the close friends, such as sizes like 5/8inch and 16mm;
although the difference is 0.13mm - you will ruin (or usually just crack) a collet or similar..