DeWalt Wood Chip Extractor / Mobiele stofafzuiger

Uit MakerSpace Leiden
Versie door DirkWillem (overleg | bijdragen) op 27 dec 2018 om 16:15 (deWalt monitor)
Ga naar: navigatie, zoeken

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 1: can only be used between 07:00 and 19:00.
Wear hearing protection.

So really - do not leave it like this. EMPTY the green back when it is about 2/3 full. Always.

deWalt large dust extractor / MOT

Use

  1. check if it needs to be emptied
  2. check that there is not a lot of buildup in the tube; or bits of wood stuck.
  3. plug it in
  4. control it with the on/of switch on the side

Post Use

  1. check that there is not a lot of buildup in the tube; or bits of wood stuck.
  2. unplug it
  3. if 2/3rd full - empty it.

deWalt monitor

There is a small NodeDeWalt Wifi monitor attached to the deWalt machine; much the same model as on the GrotePersluchtCompresssor and KleinePersluchtCompressor. It records if the machine is (left) on running or left plugged in during the night when there is no one.

Cleaning

Empty the bag once it is about 2/3 full. Any more and it'll be a total mess (see photo).

Tie the gray binliner inside close before lifting it out.

Once it is empty - put a new gray binliner inside the green bag.