Afkrasschuifmaat - Marking caliper

Uit MakerSpace Leiden
Versie door MarkKlaauw (overleg | bijdragen) op 11 nov 2024 om 21:25
(wijz) ← Oudere versie | Huidige versie (wijz) | Nieuwere versie → (wijz)
Naar navigatie springen Naar zoeken springen
De printervriendelijke versie wordt niet langer ondersteund en kan weergavefouten bevatten. Werk uw browserbladwijzers bij en gebruik de gewone afdrukfunctie van de browser.

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Handle with care - fragile ! Handle with care.
This is a precision tool with exact dimensions and straightness.
That means: handle it gently, don't hammer on it or use it as a crowbar and so on.
(if you need a crowbar - these are wonderful for that!)


It is very important that if you accidentally drop it or think it may be out of line

  • either mark the tool very clearly...
  • or report this to the mailing list...

...so that your fellow makers do not ruin their work.

Kras Schuifmaat/Marking Venier Callliper

To scratch a line relative to the edge. There is a space/flat pin in the black sleeve.

Locaties

  1. Rode kar bij metaal tafel, boven in de kap. Kept in a black sleeve.

History

  1. On loan from Dirk-Willem
  2. 2020-11-1 - recalibrated.