Spray gun

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
De printervriendelijke versie wordt niet langer ondersteund en kan weergavefouten bevatten. Werk uw browserbladwijzers bij en gebruik de gewone afdrukfunctie van de browser.

Compressed air spray gun for apply paint/clear coats.

Location

On the Perslucht Bord.

Description

Overview of the spray gun

The spray gun is composed of the following elements:

  1. Nozzle: it atomizes the fluid. 3 different nozzle sizes are available: 1.4mm, 1.7mm and 2.0mm.
  2. Fan control: controls the shape of the fan of the gun, ie. the cloud of atomized fluid.
  3. Fluid control: control the amount of fluid that gets delivered
  4. Air control: controls the air flow. This should be left fully open (unless you know what you are doing).
  5. Pressure regulator: controls the air pressure via the knob on the side. It should be around 2-2.5bar (working pressure, ie. while depressing the trigger)
  6. Water separator: prevents water from entering the gun.

Use

Ownership and history

Bought by Valère in November 2024. Property of the space

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.