Labvoedingen / PSU / Benchpower supply / Voeding

The top shelf of the right hand workbench as two precision power supplies. They are wired to two consoles on the desk itself.

The left hand unit (HP6621A) has 2 output; the right hand unit has 4.

Usage

• Ensure that nothing is plugged into the console.
• Power on the unit with the white switch (bottom left)
• Use the 'OUTPUT' button to switch between outputs; the little arrow, bottom left, of the display shows which output you are working on.

• The press the button 'Vset'
• And enter a voltage on the keypad.
• Press enter.
• Use the output disable/enable button to switch the output on.

specs

1. Left HP6221A
   1. output 1, 0-7 volt, 0-10 Ampere, 0-20 volt, 0-4 Ampere
   2. output 2, 0-7 volt, 0-10 Ampere, 0-20 volt, 0-4 Ampere
2. Right HP6624A
   1. output 1, 0-7 volt, 0-5 Ampere, 0-20 volt, 0-2 Ampere
   2. output 2, 0-7 volt, 0-5 Ampere, 0-20 volt, 0-2 Ampere
   3. output 3, 0-720volt, 0-2 Ampere, 0-50 volt, 0-0.8 Ampere
   4. output 4 0-720volt, 0-2 Ampere, 0-50 volt, 0-0.8 Ampere