DeWalt Wood Chip Extractor / Grote afzuiger

Uit MakerSpace Leiden
Versie door DirkWillem (overleg | bijdragen) op 29 nov 2018 om 20:25 (Nieuwe pagina aangemaakt met 'Category:SafetySheetCategory:ToolCategory:WoodCategory:Metal{{SafetyCat6}}{{NoiseCat2}} miniatuur = deWalt large dust extra...')
(wijz) ← Oudere versie | Huidige versie (wijz) | Nieuwere versie → (wijz)
Ga naar: navigatie, zoeken

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 2:
Can be used at all hours, but in moderation.
Be considerate; if you feel you need to wear ear protection,
then only use the tool between 07:00 and 19:00.

DeWalt.jpg

deWalt large dust extractor / MOT

Use:

  1. check if it needs to be emptied
  2. check that there is not a lot of buildup in the tube; or bits of wood stuck.
  3. plug it in
  4. control it with the on/of switch on the side

Cleaning

Empty the bag once it is about 2/3 full. Any more and it'll be a total mess (see photo).

Tie the gray binliner inside close before lifting it out.

Once it is empty - put a new gray binliner inside the green bag.