DeWalt Handdrill

Uit MakerSpace Leiden
Naar navigatie springen Naar zoeken springen
De printervriendelijke versie wordt niet langer ondersteund en kan weergavefouten bevatten. Werk uw browserbladwijzers bij en gebruik de gewone afdrukfunctie van de browser.

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 2:

  • Can be used at all hours, but in moderation.
  • Be considerate; if you feel you need to wear ear protection, then only use the tool between 07:00 and 19:00.

To drill holes.

The drill has a clutch, so can be used to drive in screws if you must. But you probably want to use the DeWalt Impact drill/electric screwdriver - it is designed for this and gives you more control.

If you do want to use the drill - then make sure you apply enough pressure on the screw to keep it from stripping. Also make sure you apply the pressure straight (i.e. not through the handle) - that helps a lot.

However - if you need to apply a lot of pressure - then use the DeWalt Impact drill/electric screwdriver -- as you end up ruining it.

We currently have two

  1. One in the wood section - which has a slightly wobbly head due to it being used for screws.
  2. One in the cupboard in the metal section - which is bought especially to keep in a good state - and it should ONLY be used for drilling.

Location

Woodworkshop - in a holder on the wall near the workbench left.

Metwalworkshop - in the cupboard

History

  1. Set 1 bought by the space mid 2015
  2. Set 2 bought by the space mid 2020