Blokhaak Winkelhaak Square

Uit MakerSpace Leiden
Versie door DirkWillem (overleg | bijdragen) op 11 nov 2020 om 15:24 (DirkWillem heeft pagina Blokhaak hernoemd naar Blokhaak Winkelhaal Square)
Naar navigatie springen Naar zoeken springen
De printervriendelijke versie wordt niet langer ondersteund en kan weergavefouten bevatten. Werk uw browserbladwijzers bij en gebruik de gewone afdrukfunctie van de browser.


This equipment is safety category 6: Other equipment with no limits.


This equipment is Noise Category 3: Can be used at all hours. No limits.


Handle with care - fragile ! Handle with care.
This is a precision tool with exact dimensions and straightness.
That means: handle it gently, don't hammer on it or use it as a crowbar and so on.
(if you need a crowbar - these are wonderful for that!)


It is very important that if you accidentally drop it or think it may be out of line

  • either mark the tool very clearly...
  • or report this to the mailing list...

...so that your fellow makers do not ruin their work.



Blokhaak


Blokhaak


Blokhaak



Try not to drop them - and if you do - report it (it is fine - they are not expensive to replace).
The red one is a precision 'knife' style square and used with light. Check youtube for how this works. Be extra careful as this one is not exactly cheap.



= Location =
The aluminium one can be found in the woodworkshop; the small metal ones in a wooden box in de red trolly and the red-box preciesion one in the blue cart.


On Loan

Red box - On loan; Dirk-Willem van Gulik



History

  • Bought by the space 20013