3D-printen: verschil tussen versies
(→Using a SD memory card) |
|||
(31 tussenliggende versies door 5 gebruikers niet weergegeven) | |||
Regel 1: | Regel 1: | ||
− | [[Categorie:Tool | + | [[Categorie:Tool]][[Categorie:CNC]] |
− | |||
− | |||
− | |||
− | |||
{{SafetyCat3}} | {{SafetyCat3}} | ||
+ | {{NoiseCat3}} | ||
+ | {{Overnight}} | ||
+ | ==Ultimaker printers== | ||
+ | The Makerspace has three 3D printers, the Ultimaker2+, the Slightly higher Ultimaker2 extended+ and a Fancy Ultimakler 3 something with 2 nozzels. | ||
− | + | * [https://ultimaker.com/3d-printers/ultimaker-2-plus Ultimaker2 series website] | |
− | * | + | * [[Ultimaker2|Wiki page about our Ultimaker2 printers, including how to's]] |
− | + | * Ultimaker 3 -- not yet documented. Possible [https://support.ultimaker.com/hc/en-us/article_attachments/360010834540/Ultimaker_3_manual__NL_.pdf manual] and, see page 11, filament diameter of 2.85mm | |
+ | The ultimaker 3 [[UltimakerBuildplateCamera|buildplate camera]] can be seen remotely through the CRM (but only if it is actually switched on and running/printing). | ||
− | + | ==Software== | |
+ | For the design of 3D models, the following software can be used: | ||
+ | * [https://www.openscad.org Open scad] - Openscad is a open source software for creating solid 3D Cad objects (available on Wndows, MacOS and Unix/Linux). Openscad is a scripting language | ||
+ | * [https://www.autodesk.com/products/fusion-360/overview Fusion 360] Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS) | ||
+ | * [https://www.tinkercad.com Tinkercad] Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding. | ||
− | |||
− | |||
− | |||
+ | Any CAD software that is able to convert your design into a STL files is suitable for designing for or 3D printers. Alternatives are [https://www.sketch.com/ Sketch] and [https://www.blender.org Blender]. | ||
− | + | == Using a SD memory card == | |
+ | The Ultimaker printers at the Space need a GCODE file as input. You can put your GCODE files on a SD memory card and insert the memory card directly in one of the Ultimaker 3D printer. The memory cardslot is on the front of the printer. | ||
− | + | * If you need to format your SD memory card (e.g. on MacOS), choose FAT32 and Master Boot Record (MBR) -- note that you need to expressly select FAT32; not the (new default) 'ExFAT'. | |
− | + | If you have a design file e.g. from Internet or a design program you need to convert your file, to the GCODE format or Ultimaker 3D printers can work with. STL is a common file file format and the easiest to to convert to GCODE. If you have a design in an other format it is possible to first convert this to the STL file format. Search with google for online conversion tools. (If you find a conversion tool, that gives good results, feel free to add URL here) | |
+ | STL file can be converted into a GCODE by: | ||
+ | * [http://software.ultimaker.com Cura] Cura is used to slice the model and prepare the GCODE (file extension .NGO) | ||
+ | * [http://slic3r.org/ Slic3r] Slic3r is used to slice the model and prepare the GCODE. | ||
+ | == Using a laptop == | ||
+ | There is also the option to directly print from your laptop, without using a memory card. | ||
+ | * [https://github.com/kliment/PrintRun PrintRun] allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE file is uploaded via the USB connection on the backside of the printer. | ||
+ | == The printing process == | ||
+ | Once you have your printable GCODE file on a SD memory card, or your laptop ready and connected, goto [[Ultimaker2]] for a step by step tutorial of the 3D printing process. | ||
− | + | * Nextstep read: [[Ultimaker2]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | * | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Huidige versie van 21 okt 2022 om 20:41
This equipment is safety category 3:
- Mandatory, in person, instructions.
- Make sure you read the Wiki before asking.
This equipment is Noise Category 3: Can be used at all hours. No limits.
This equipment can be left on overnight/ran unattended -- provided that the instructions on this page are followed to the letter.
Inhoud
Ultimaker printers
The Makerspace has three 3D printers, the Ultimaker2+, the Slightly higher Ultimaker2 extended+ and a Fancy Ultimakler 3 something with 2 nozzels.
- Ultimaker2 series website
- Wiki page about our Ultimaker2 printers, including how to's
- Ultimaker 3 -- not yet documented. Possible manual and, see page 11, filament diameter of 2.85mm
The ultimaker 3 buildplate camera can be seen remotely through the CRM (but only if it is actually switched on and running/printing).
Software
For the design of 3D models, the following software can be used:
- Open scad - Openscad is a open source software for creating solid 3D Cad objects (available on Wndows, MacOS and Unix/Linux). Openscad is a scripting language
- Fusion 360 Fusion 360 is an integrated CAD/CAM/CAE software to design 3D models. For personal use it is free of charge (available on Windows, MacOS)
- Tinkercad Tinkercad is a free, easy-to-use app for 3D design, electronics, and coding.
Any CAD software that is able to convert your design into a STL files is suitable for designing for or 3D printers. Alternatives are Sketch and Blender.
Using a SD memory card
The Ultimaker printers at the Space need a GCODE file as input. You can put your GCODE files on a SD memory card and insert the memory card directly in one of the Ultimaker 3D printer. The memory cardslot is on the front of the printer.
- If you need to format your SD memory card (e.g. on MacOS), choose FAT32 and Master Boot Record (MBR) -- note that you need to expressly select FAT32; not the (new default) 'ExFAT'.
If you have a design file e.g. from Internet or a design program you need to convert your file, to the GCODE format or Ultimaker 3D printers can work with. STL is a common file file format and the easiest to to convert to GCODE. If you have a design in an other format it is possible to first convert this to the STL file format. Search with google for online conversion tools. (If you find a conversion tool, that gives good results, feel free to add URL here)
STL file can be converted into a GCODE by:
- Cura Cura is used to slice the model and prepare the GCODE (file extension .NGO)
- Slic3r Slic3r is used to slice the model and prepare the GCODE.
Using a laptop
There is also the option to directly print from your laptop, without using a memory card.
- PrintRun allows direct control of the printer and offer more opportunities than Cura/Slic3r. The GCODE file is uploaded via the USB connection on the backside of the printer.
The printing process
Once you have your printable GCODE file on a SD memory card, or your laptop ready and connected, goto Ultimaker2 for a step by step tutorial of the 3D printing process.
- Nextstep read: Ultimaker2