Elektrische figuurzaag (Scrollsaw): verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(blades)
(blades)
Regel 14: Regel 14:
 
Blades break easily; spare ones cost around a 5 for a pack of 10 or so.
 
Blades break easily; spare ones cost around a 5 for a pack of 10 or so.
  
If you need blades for them - you typically want the `figuurzaag met dwarsstift’; [[http://www.hartwijk.nl Hartwijk]] and the local builder shops usually have them. You generally want the right type for wood, metal or whatever you are sawing.  
+
If you need blades for them - you typically want the `figuurzaag met dwarsstift’; [[http://www.hartwijk.nl Hartwijk]] and the local builder shops usually have them.  
  
 
[[Bestand:Figuurzaag-met-stift.jpg|figuurzaag met stift]]
 
[[Bestand:Figuurzaag-met-stift.jpg|figuurzaag met stift]]
  
 
One of the machines will take a normal (without pin) saw blade.
 
One of the machines will take a normal (without pin) saw blade.
 +
 +
You generally want the right type for wood, metal or whatever you are sawing.
  
 
There is currently not a fixed place where we keep the blades. In fact - we're probably right out of them.
 
There is currently not a fixed place where we keep the blades. In fact - we're probably right out of them.

Versie van 11 dec 2018 om 14:33

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

Use of protective eye wear recommended.

We have several electrical scrollsaws. One is usually sitting in the woodshop on the bench. The others are usually on top of the cupboard in the metal working area or near the toilets.

We do not yet have a fixed places for the replacement saw blades.

Elec-figuur.jpg


blades

Blades break easily; spare ones cost around a 5 for a pack of 10 or so.

If you need blades for them - you typically want the `figuurzaag met dwarsstift’; [Hartwijk] and the local builder shops usually have them.

figuurzaag met stift

One of the machines will take a normal (without pin) saw blade.

You generally want the right type for wood, metal or whatever you are sawing.

There is currently not a fixed place where we keep the blades. In fact - we're probably right out of them.

If you want to be re-imbursed; keep the receipt & tell the mailing lists that you've bought them.

use

These machines are for wood and metal; but acrylic and similar materials work fine.

Metal use

Do not use the machine in the woodshop for metal (to avoid contaminating the wood with oil and filing; this ruining peoples lacquer). Instead take one of the other machines to the metal shop and use it there.