KWh meter: verschil tussen versies
| Regel 1: | Regel 1: | ||
| − | kWh meter. | + | kWh meter. energy meter. amp meter. Schleifenbauer DPM3 |
| + | |||
| + | [[Bestand:Kwhmeter.jpg|miniatuur]] | ||
| + | The Schleifenbauer DPM3 kWh meter was donated by Schleifenbauer in oct 2020. The full specs of this meter can be found at: https://www.schleifenbauer.eu/en/product-selector/dpm3/ | ||
| + | The DPM3 has an upgradeble firmware. you can find the latest version here: https://docs.schleifenbauer.eu/?dir=Firmware | ||
| + | |||
| + | == Location == | ||
| + | The DPM3 can be found underneath the power devider panel (next to 19" cabinet) | ||
| + | |||
| + | == Operation == | ||
| + | The user manual: | ||
| + | [[Bestand:Schleifenbauer-UserManual-PDU-v2.42.pdf|miniatuur]] | ||
| + | It's the generic Schleifenbauer manual, you can skip the parts that refer to PDUs, the interface of the DPM3 is identical to the PDU. | ||
| + | |||
| + | The DPM3 has an on board web server which can be accessed via...(tbd) | ||
| + | |||
| + | It measures the following quantities on each of the 3 phases: | ||
| + | |||
| + | Note: a blinking meter means that the treshold for max AMP has been surpassed. It can be reset via the web interface. | ||
| + | |||
| + | == Measurements == | ||
| + | * kWh (energy total/subtotal) | ||
| + | * Amp (with peak registration) | ||
| + | * Pf (power factor) | ||
| + | * U (voltage) | ||
| + | * W (Wattage) | ||
| + | |||
| + | it can be equiped with a Temp/Hum sensor and a dry contact output | ||
| + | |||
| + | == Interfaces == | ||
| + | The DPM3 supports multiple interfaces: | ||
| + | * HTTP | ||
| + | * API | ||
| + | * Modbus | ||
| + | * SNMP | ||
| + | |||
| + | So you can download the measurements at any given interval into a monitoring tool. Maybe someone feels the urge to do so... feel free to read the manual on how to set up the unit for this. | ||
| + | Please note that, when retreiving the peak current value it is advised to reset it to zero afterwards in order to get a meaningfull value at next retrieval. | ||
| + | |||
| + | == Access == | ||
| + | |||
| + | The web interface is open to view. Only designated persons have the password to change the settings of the meter. Request for access via 'hetbestuur' | ||
| + | |||
| − | |||
.... | .... | ||
Versie van 20 nov 2020 om 11:13
kWh meter. energy meter. amp meter. Schleifenbauer DPM3
The Schleifenbauer DPM3 kWh meter was donated by Schleifenbauer in oct 2020. The full specs of this meter can be found at: https://www.schleifenbauer.eu/en/product-selector/dpm3/ The DPM3 has an upgradeble firmware. you can find the latest version here: https://docs.schleifenbauer.eu/?dir=Firmware
Location
The DPM3 can be found underneath the power devider panel (next to 19" cabinet)
Operation
The user manual:
It's the generic Schleifenbauer manual, you can skip the parts that refer to PDUs, the interface of the DPM3 is identical to the PDU.
The DPM3 has an on board web server which can be accessed via...(tbd)
It measures the following quantities on each of the 3 phases:
Note: a blinking meter means that the treshold for max AMP has been surpassed. It can be reset via the web interface.
Measurements
- kWh (energy total/subtotal)
- Amp (with peak registration)
- Pf (power factor)
- U (voltage)
- W (Wattage)
it can be equiped with a Temp/Hum sensor and a dry contact output
Interfaces
The DPM3 supports multiple interfaces:
- HTTP
- API
- Modbus
- SNMP
So you can download the measurements at any given interval into a monitoring tool. Maybe someone feels the urge to do so... feel free to read the manual on how to set up the unit for this. Please note that, when retreiving the peak current value it is advised to reset it to zero afterwards in order to get a meaningfull value at next retrieval.
Access
The web interface is open to view. Only designated persons have the password to change the settings of the meter. Request for access via 'hetbestuur'
....
