Labvoedingen / PSU / Benchpower supply / Voeding: verschil tussen versies
(→specs) |
(→Usage) |
||
Regel 10: | Regel 10: | ||
= Usage = | = Usage = | ||
− | + | * Ensure that nothing is plugged into the console. | |
− | + | * Power on the unit with the white switch (bottom left) | |
+ | * Use the 'OUTPUT' button to switch between outputs; the little arrow, bottom left, of the display shows which output you are working on. | ||
− | The | + | [[Bestand:hp-lcd.jpg|300px]] [[Bestand:hp-keypad.jpg|300px]] |
+ | |||
+ | * The press the button 'Vset' | ||
+ | * And enter a voltage on the keypad. | ||
+ | * Press enter. | ||
+ | * Use the output disable/enable button to switch the output on. | ||
= specs = | = specs = |
Versie van 25 mrt 2018 om 22:05
The top shelf of the right hand workbench as two precision power supplies. They are wired to two consoles on the desk itself.
The left hand unit (HP6621A) has 2 output; the right hand unit has 4.
Usage
- Ensure that nothing is plugged into the console.
- Power on the unit with the white switch (bottom left)
- Use the 'OUTPUT' button to switch between outputs; the little arrow, bottom left, of the display shows which output you are working on.
- The press the button 'Vset'
- And enter a voltage on the keypad.
- Press enter.
- Use the output disable/enable button to switch the output on.
specs
- Left HP6221A
- output 1, 0-7 volt, 0-10 Ampere, 0-20 volt, 0-4 Ampere
- output 2, 0-7 volt, 0-10 Ampere, 0-20 volt, 0-4 Ampere
- Right HP6624A
- output 1, 0-7 volt, 0-5 Ampere, 0-20 volt, 0-2 Ampere
- output 2, 0-7 volt, 0-5 Ampere, 0-20 volt, 0-2 Ampere
- output 3, 0-720volt, 0-2 Ampere, 0-50 volt, 0-0.8 Ampere
- output 4 0-720volt, 0-2 Ampere, 0-50 volt, 0-0.8 Ampere