PowerNode White: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(→‎Extra IO connector)
 
(8 tussenliggende versies door dezelfde gebruiker niet weergegeven)
Regel 22: Regel 22:
 
There may be additional pages on some nodes. Exist this by pressing the left button or waiting for a few seconds.
 
There may be additional pages on some nodes. Exist this by pressing the left button or waiting for a few seconds.
  
−
= Hardware options =
+
= Setup / build =
  
−
The boards allow for various extra `options'
+
See [[PowerNode White - Configuration| this page for details]] on the electronics.
−
 
 
−
== Pushbutton and LED connectors ==
 
−
 
 
−
Normal two-pin XH 2.54 connector for the LED and for each of the push-buttons (inside the footprint). Same type as often used for fans on PCs.
 
−
 
 
−
* See https://nl.aliexpress.com/item/1005006168591801.html [[Bestand:Xh254.jpg|50px]]
 
−
 
 
−
Pushbuttons are 6x6mm standard pushbuttons; switch at least 10mm high. E.g. https://www.hobbyelectronica.nl/product/push-button-6x6x5/
 
−
 
 
−
== External/separate current coil ==
 
−
 
 
−
The current coils can be on the PCB - but can also be replaced by a 3.5mm jacket and a standard pickup.
 
−
 
 
−
* 3.5mm jackets: https://nl.aliexpress.com/item/1005004035360795.html [[Bestand:PCBjack-3_5mm.jpg|30px]]
 
−
* Current coil: https://nl.aliexpress.com/item/1005006003984501.html [[Bestand:Current-coil-3_5mm.jpg|30px]]
 
−
 
 
−
This is used on the [[Ceramic Oven]] its [[NodeCeramic]].
 
−
 
 
−
== Pressure sensor ==
 
−
 
 
−
== OLED screen ==
 
−
 
 
−
Used are Oled Display Module 12864 SH1106 I2C screens with 30 pins.
 
−
 
 
−
[[Bestand:Screen-oled-30-i2c.jpg|50px]]
 
−
 
 
−
== Enclosure ==
 
−
 
 
−
The PCB fits a 150x150 enclosure - such as zp150-150-60 series. E.g:
 
−
https://www.tme.eu/nl/details/zp15015060jph-pc/behuizingen-universeel/kradex/zp150-150-60jph-tm-pc/ (around 10 euro).
 
−
 
 
−
== Large 15 pin Connector ==
 
−
 
 
−
A large connector or socket can be used; 3.5mm pitch. E.g. https://de.aliexpress.com/item/1005006345862685.html - around one euro.
 
−
 
 
−
== Extra IO connector ==
 
−
 
 
−
Normal 2.5mm pitch
 
−
 
 
−
== Solid state relay ==
 
−
 
 
−
Two types of Solid State relays - in line and 'box'
 

Huidige versie van 15 apr 2024 om 22:18


The White power nodes (most recent version 1.08) are an improved version of the PowerNodeNG.

See these pages for manuals for each of these machines. Or this pages for everything on Access nodes.

General Use

To start the machine - swipe your card. You should hear a beeb when the card is scanned. And a second short beeb when it is accepted. They may almost coincide if the network is fast that day.

To stop the machine - press the normal stop button on the machine if it has a SafetyRelay - or press the small button next to 'OFF' on the node itself when the machine does not have a SafetyRelay.

Accessing logging and trouble shooting

Use the right button labeled 'MORE' button (only accessible when the machine is not powered on) to access an extra set of menu's:

  1. Page 1 -- a QR code with a URL to a wiki page with documentation.
  2. Page 2 -- a QR code with an HTTP URL that will show the logging (you need to be physically at the space for this.
  3. Page 3 -- a page with the IP address and other details. You can 'telnet' to this IP address directly to see the (serial) log.

There may be additional pages on some nodes. Exist this by pressing the left button or waiting for a few seconds.

Setup / build

See this page for details on the electronics.

Overgenomen van "https://wiki.makerspaceleiden.nl/mediawiki/index.php?title=PowerNode_White&oldid=13522"