ToDo: verschil tussen versies
(→??) |
(→Blue Laser engraver/cutter) |
||
Regel 39: | Regel 39: | ||
===Blue Laser engraver/cutter=== | ===Blue Laser engraver/cutter=== | ||
− | * | + | * Is defect, moet worden gerepareerd. Mogelijk voeding. |
===Saurus=== | ===Saurus=== |
Versie van 15 apr 2021 om 17:30
We maintain the space collectively - as an all volunteer effort.
Inhoud
recurring
- vacuüm small room
- And maybe the larger one too (or use a broom)
- Dishes
- clean kitchen
- clean toilet
- Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
- Return misplaced tools to where they belong.
- Specialist: clean LaserSaur (& Red&Blue engravers) Mirrors
- Clean lasersaur bed
- Clean air filter
Tasks that the CRM will email about:
- put bin out on the right day - volunteer in CRM
- Check compressors (Water seperators and condensation outlet)- volunteer in CRM
- Check drillbits (3x) and replenish from the green storage/bulk box - volunteer in CRM
- Refill the various SnijOlie BoorOlie CuttingOil bottles - volunteer in CRM
Physical things
Small jobs
- Vaccuum-clean small room.
- Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)
- Inkorten alle zwarte slangen perslucht (Alex/Jan zijn slangpilaartjes aan het bestellen,
New dust control for the wood workshop: Succobus
- Tubing:
Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length.Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
- Electrics:
- Feed the bare-copper wire through all the tubes -- to stop static dust collection.
Blue Laser engraver/cutter
- Is defect, moet worden gerepareerd. Mogelijk voeding.
Saurus
- Side panel for electronics is missing, they now get dusty. Clean & replace.
- Recurring: Cleaning. Cleaning mirrors is specialist work.
Wiring
- Wire the lamp above the metal work table to the TL lights in the ceiling.
- Find higher power tubes that do not flicker for that fitting.
Network
# Remove all VLANs and flatten the network to one.
- Update docs how how we did the firewall, etc. -- see 2020 grote opruiming netwerk
Metaal werkplaats
# werktafel aan vloer zetten
- 4x L Beugeltjes maken om de poten van de werktafel beter aan de 4 keilbouten vast te zetten
Documentation things
- Update the wiki to describe the second garbage bin processes.
- We have quite a few Tools without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
- Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
- put config files for the laos lasercutters on github
- update wiki with new visicut
Cyber Things
- Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
- Find and install crosspost module on wordpress to twitter/facebook.
- See if we can do post-by-email or simpler for wordpress.
repairs
floor
- fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
electric
There is one outlet left of the abene that does not work, possibly a loose wire?Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.