ToDo: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(→‎recurring)
 
(63 tussenliggende versies door 7 gebruikers niet weergegeven)
Regel 1: Regel 1:
 +
[[Category:Algemeen]]
 +
 +
 
We maintain the space collectively - as an all volunteer effort.
 
We maintain the space collectively - as an all volunteer effort.
  
−
== Physical things ==
+
==recurring==
 +
 
 +
* vacuüm small room
 +
* And maybe the larger one too (or use a broom)
 +
* Dishes
 +
* clean kitchen
 +
* clean toilet
 +
* Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
 +
* Return misplaced tools to where they belong.
 +
* Specialist: clean LaserSaur (& Red&Blue engravers) Mirrors
 +
* Clean lasersaur bed
 +
* Clean air filter
 +
 
 +
Tasks that the CRM will email about:
  
−
* Make a good photo of the first aid box -in-situ- that shows clearly where it is; and put it on [[FirstAid EHBO Doos]]
+
* put bin out on the right day - volunteer in CRM
−
* Make good photos of the fire-extinguishers; -in-situ- that shows clearly where they are and put on [[Fireextingishers]] including expiry dates.
+
* Check compressors (Water seperators and condensation outlet)- volunteer in CRM
 +
* Check drillbits (3x) and replenish from the green storage/bulk box - volunteer in CRM
 +
* Refill the various [[SnijOlie BoorOlie CuttingOil]] bottles - volunteer in CRM
  
 +
==Physical things==
 +
===Small jobs===
 +
 +
* Vaccuum-clean small room.
 +
* Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)
 +
* Inkorten alle zwarte slangen perslucht (Alex/Jan zijn slangpilaartjes aan het bestellen,
  
 
===New dust control for the wood workshop: [[Succobus]]===
 
===New dust control for the wood workshop: [[Succobus]]===
 
* Tubing:
 
* Tubing:
−
** <strike>Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. </strike> Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
+
** <s>Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. </s> Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
 +
 
 
* Electrics:
 
* Electrics:
 
** Feed the bare-copper wire through all the tubes -- to stop static dust collection.
 
** Feed the bare-copper wire through all the tubes -- to stop static dust collection.
  
−
=== red laser engraver/cutter ===
+
===Blue Laser engraver/cutter===
−
* put config file on github
+
* Is defect, moet worden gerepareerd. Mogelijk voeding.
−
* update wiki with new visicut
 
  
−
=== Blue Laser engraver/cutter ===
+
===Saurus===
−
* Specialist work. Don' t undertake unless comfortable and capable. See [[Blue_laser_engraver]]
 
−
** correct fan wire in power supply contacting fan blades making noise
 
  
−
* non-dangerous work:
+
* Side panel for electronics is missing, they now get dusty. Clean & replace.
−
** update [[Blue_laser_engraver]] (Add a picture)
+
* Recurring: Cleaning. Cleaning mirrors is specialist work.
−
** Honingraatbed?
 
−
** Top-up the cooling water (with demineralized 'laser' water with a drop of the 'no-green-stuff--stuff')
 
−
** <s>improve network connection (Already on [[NetworkSetup#IP]] but machine itself needs to be configured accordingly. Currently it has a set IP and no DHCP, new config should be DHCP and it will get a static IP)</s>
 
−
** Wire the OTHER end of the network to the patchkast. See 'wiring'
 
−
** <s>Put config files on github </s>(Also for the red one, and maybe compare them?)
 
  
−
=== lights ===
+
===Wiring===
−
* Hang the warmer lights in the small room (preferably before Hans returns! as he donated them.)
+
* Wire the lamp above the metal work table to the TL lights in the ceiling.
−
** We might need to get cable etc. first
+
* Find higher power tubes that do not flicker for that fitting.
  
−
=== Wiring ===
+
===Network===
 +
<s># Remove all VLANs and flatten the network to one.</s>
 +
# Update docs how how we did the firewall, etc. -- see [[2020 grote opruiming netwerk]]
  
−
* Affix the dangling small 2 port junction box to the concrete slab above the space door. Plug's are in a box labeled thus in the green cabinet; the big green metabo drill in the woodshop can be set to hammering.
+
===Metaal werkplaats===
−
* Various network boxes have not yet been connected at the Patchkast. Among them the 2nd box (lower one) near the laser cutters, possibly the one near the CNC, and probably others: there is a bundle of at least 8 unconnected cables at the patchkast.
+
<s># werktafel aan vloer zetten</s>
 +
# 4x L Beugeltjes maken om de poten van de werktafel beter aan de 4 keilbouten vast te zetten
  
−
=== recurring ===
+
==Documentation things==
−
* vacuüm small room
 
−
* And maybe the larger one too (or use a broom)
 
−
* Dishes
 
−
* clean kitchen
 
−
* clean toilet
 
−
* put bin out on the right day - volunteer in CRM
 
−
* Check the various boxes with drills and replace them from the supply.
 
−
* Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
 
−
* Return misplaced tools to where they belong.
 
  
−
== Documentation things ==
 
 
* Update the wiki to describe the second garbage bin processes.
 
* Update the wiki to describe the second garbage bin processes.
−
* We have quite a few [[:Categorie:Tool|Tools]] without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
+
* We have quite a few [[:Categorie:Tool|Tools]] without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
 
* Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
 
* Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
 +
* put config files for the laos lasercutters on github
 +
* update wiki with new visicut
  
−
== Cyber Things ==
+
==Cyber Things==
  
 
* Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
 
* Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
Regel 60: Regel 72:
 
* See if we can do post-by-email or simpler for wordpress.
 
* See if we can do post-by-email or simpler for wordpress.
  
−
== repairs ==
+
==repairs==
 +
 
 +
 
 +
 
 +
===floor===
  
−
=== floor ===
 
 
* fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
 
* fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)
−
* procure/find/ask shops for scraps a piece of linoleum for the small room. Same thickness, any color. About .. cm wide / .. m long. Or smaller pieces that add up. Also glue and filament (for the seams).
 
−
** put it all in place, fixing the "gutter" in front of E-table.
 
  
−
=== electric ===
+
===electric===
−
* There is one outlet left of the abene that does not work, possibly a loose wire?
+
 
−
* We 're out of 12V halogen bulbs for the small desklights (But the white/translucent one has had it's bulb replaced with the last spare)
+
* <s>There is one outlet left of the abene that does not work, possibly a loose wire?</s> Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.

Huidige versie van 28 dec 2023 om 18:07


We maintain the space collectively - as an all volunteer effort.

recurring

  • vacuüm small room
  • And maybe the larger one too (or use a broom)
  • Dishes
  • clean kitchen
  • clean toilet
  • Clean and reoil the various metal working machines - including a thin coat of slideways-oil / lijbaan olie on the gangways/slides/lijbanen.
  • Return misplaced tools to where they belong.
  • Specialist: clean LaserSaur (& Red&Blue engravers) Mirrors
  • Clean lasersaur bed
  • Clean air filter

Tasks that the CRM will email about:

  • put bin out on the right day - volunteer in CRM
  • Check compressors (Water seperators and condensation outlet)- volunteer in CRM
  • Check drillbits (3x) and replenish from the green storage/bulk box - volunteer in CRM
  • Refill the various SnijOlie BoorOlie CuttingOil bottles - volunteer in CRM

Physical things

Small jobs

  • Vaccuum-clean small room.
  • Sort Plastic Stash under lasersaurus: Un-laserable PolyCarbonate is now mixed in with the laserable Acrylic. Move un-laserable PC (To where? Algemene voorraadkast? Lasersaurkast because it is what the saur is made of? Something Frees-ish because usable with frees?)
  • Inkorten alle zwarte slangen perslucht (Alex/Jan zijn slangpilaartjes aan het bestellen,

New dust control for the wood workshop: Succobus

  • Tubing:
    • Put short pipes on each T junction behind each machine; then the Valve, then a short pipe and then a bit of hose of the right length. Secure with hose clamps. We'll need to make a few wooden/plastic adaptors on the lathe to get the diameters right.
  • Electrics:
    • Feed the bare-copper wire through all the tubes -- to stop static dust collection.

Blue Laser engraver/cutter

  • Is defect, moet worden gerepareerd. Mogelijk voeding.

Saurus

  • Side panel for electronics is missing, they now get dusty. Clean & replace.
  • Recurring: Cleaning. Cleaning mirrors is specialist work.

Wiring

  • Wire the lamp above the metal work table to the TL lights in the ceiling.
  • Find higher power tubes that do not flicker for that fitting.

Network

# Remove all VLANs and flatten the network to one.

  1. Update docs how how we did the firewall, etc. -- see 2020 grote opruiming netwerk

Metaal werkplaats

# werktafel aan vloer zetten

  1. 4x L Beugeltjes maken om de poten van de werktafel beter aan de 4 keilbouten vast te zetten

Documentation things

  • Update the wiki to describe the second garbage bin processes.
  • We have quite a few Tools without foto's or where we use bland photos from HBM. To replace. Ideally in situ so you know where things are.
  • Video of an expert (e.g. HansD) replacing & adjusting the knifes on the planer/jointer with the special tool.
  • put config files for the laos lasercutters on github
  • update wiki with new visicut

Cyber Things

  • Add OpenID or similar to the CRM and push/wire this up to wordpress and the wiki.
  • Find and install crosspost module on wordpress to twitter/facebook.
  • See if we can do post-by-email or simpler for wordpress.

repairs

floor

  • fix holes in floor in large room (with the right kind of concrete / get it somewhat level and evenly)

electric

  • There is one outlet left of the abene that does not work, possibly a loose wire? Fixed. But can be pulled out of the wall with the plug. That' s left for someone else to fix.
Overgenomen van "https://wiki.makerspaceleiden.nl/mediawiki/index.php?title=ToDo&oldid=12705"