Verzinkboren - countersink drill - counterbore: verschil tussen versies
(Nieuwe pagina aangemaakt met 'There is a large box of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and SnijOlie BoorOlie Cutt...') |
|||
Regel 1: | Regel 1: | ||
− | + | [[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]] | |
+ | {{SafetyCat6}} | ||
+ | {{NoiseCat3}} | ||
− | There | + | == Metal == |
+ | |||
+ | There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and [[SnijOlie BoorOlie CuttingOil|Cutting oil]]. | ||
+ | |||
+ | This includes angled and square ones. | ||
+ | |||
+ | == Wood == | ||
[[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]] | [[Bestand:Wood-counter-bore.jpg|miniatuur|Counterbore/countersink drill/verzinkboor - type voor WOOD/Hout]] | ||
+ | |||
+ | There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship. | ||
+ | |||
+ | There is a wooden box with small ones above the mitre saw. |
Versie van 16 dec 2019 om 17:16
This equipment is safety category 6: Other equipment with no limits.
This equipment is Noise Category 3: Can be used at all hours. No limits.
Metal
There is a large, blue, box of 8 sizes of metal countersink drills in the metal workshop -- use speeds about 30-60% lower than normal for that diameter - and Cutting oil.
This includes angled and square ones.
Wood
There are special wood ones in the wood area - kept in the red box with drills on the workbench side of the woodship.
There is a wooden box with small ones above the mitre saw.