Vingerzetbank MetalSheetBender: verschil tussen versies

Uit MakerSpace Leiden
Ga naar: navigatie, zoeken
(Nieuwe pagina aangemaakt met 'Categorie:ToolCategorie:MetalCategorie:Small<br />{{SafetyCat6}}<br />{{NoiseCat3}}<br /> We have two machines to bend metal (vingerszetbanken). A l...')
 
Regel 1: Regel 1:
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]<br  />{{SafetyCat6}}<br  />{{NoiseCat3}}<br  />
+
[[Categorie:Tool]][[Categorie:Metal]][[Categorie:Small]]
 +
{{SafetyCat6}}{{NoiseCat3}}
  
 
We have two machines to bend metal (vingerszetbanken). A large one and a small one.
 
We have two machines to bend metal (vingerszetbanken). A large one and a small one.
 +
 +
If you've never used one - ask for help if needed - there are a few clever tricks that are not obvious.
  
 
[[Bestand:vingerzetbank1-msl.jpg|400px]]
 
[[Bestand:vingerzetbank1-msl.jpg|400px]]

Versie van 11 nov 2023 om 21:23

This equipment is safety category 6: Other equipment with no limits.

This equipment is Noise Category 3: Can be used at all hours. No limits.

We have two machines to bend metal (vingerszetbanken). A large one and a small one.

If you've never used one - ask for help if needed - there are a few clever tricks that are not obvious.

Vingerzetbank1-msl.jpg Vingerzetbank2-msl.jpg

History

Metaal Werkplaats; the large one is usually on the floor behind the Abene; the small one next to the drill.

History

Owned by the sapce